Peugeot 207 1.4 (8v 75bhp, same as 206 etc) starting problem
Discussion
Hi all,
My girlfriend's car has had this problem for as long as I can remember where you need to blip the throttle a bit when starting (cranking) in order for it to fire into life.
Once running, it's perfect, idles properly, no engine management lights or anything.
I tried replacing the MAP sensor recently on a hunch which I think made it better at cold starting but hasn't really cured the problem. This hunch was me basically unplugging the MAF sensor which caused it to start and idle perfectly..
Does anyone know what might be causing this and what else to maybe focus on?
Does anyone know if there's any dashboard diagnostic mode that can display fault codes without having to buy a reader?
It's the quite old (and quite horrid) TU3 1.4 8v 75bhp engine, used in the 206, 306 and 106 as well I think!
Thanks a lot.
My girlfriend's car has had this problem for as long as I can remember where you need to blip the throttle a bit when starting (cranking) in order for it to fire into life.
Once running, it's perfect, idles properly, no engine management lights or anything.
I tried replacing the MAP sensor recently on a hunch which I think made it better at cold starting but hasn't really cured the problem. This hunch was me basically unplugging the MAF sensor which caused it to start and idle perfectly..

Does anyone know what might be causing this and what else to maybe focus on?
Does anyone know if there's any dashboard diagnostic mode that can display fault codes without having to buy a reader?
It's the quite old (and quite horrid) TU3 1.4 8v 75bhp engine, used in the 206, 306 and 106 as well I think!
Thanks a lot.
Edited by Howard- on Saturday 17th August 08:44
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


