high oil pressure, but light on?
high oil pressure, but light on?
Author
Discussion

santona1937

Original Poster:

878 posts

161 months

Saturday 17th August 2013
quotequote all
As the title says, my oil pressure gauge reads normal/high, my oil levels are fine, but the oil light is on

This is a paradox.... oil sensor maybe?
any other thoughts from PHers?
thanks

Nigel Worc's

8,121 posts

219 months

Saturday 17th August 2013
quotequote all
What car, and what colour is the light ?

For example, a red oil light on a BMW is lack of pressure, if the same light is amber, it is the wrong grade !

SV8Predator

2,102 posts

196 months

Saturday 17th August 2013
quotequote all
Nigel Worc's said:
if the same light is amber, it is the wrong grade !
Or low oil level. Not sure how it checks the grade.

V8RX7

28,982 posts

294 months

Saturday 17th August 2013
quotequote all
Frequently the gauge and the light use different sensors.

Assuming you are correct and both measure pressure then I'd try a new sensor for the light.

Nigel Worc's

8,121 posts

219 months

Saturday 17th August 2013
quotequote all
SV8Predator said:
Nigel Worc's said:
if the same light is amber, it is the wrong grade !
Or low oil level. Not sure how it checks the grade.

I don't know either ..... but it does.

How I know :

I have a 2000 E39 528i SE, which may have semi or fully sync oil, I run it on semi.

My friend has a 2002 325i, he put the same oil I do into his on an oil change (I've no idea why, but he did), and his is only specced at fully sync.

The car started ok, but after a minute or so, the oil light came on , but it was amber instead of red, a quick call by him to the dealer, and they told him he had the wrong grade of oil in it.

He changed the oil again, and all was well.

santona1937

Original Poster:

878 posts

161 months

Sunday 18th August 2013
quotequote all
thanks

Willy Nilly

12,511 posts

198 months

Sunday 18th August 2013
quotequote all
I am lead to believe that if the oil pressure really is lo enough to put the light on you have seconds to shut the engine down before it self destructs.

Engines that drive irrigation pumps have sensors for high coolant temp and low oil pressure that shut down the engine because they will be left un-attended and might be running for months. I read on another channel that someone would unscrew the oil sensor because he had lost more engines to fire where the sensor had been leaking than he had to them loosing oil pressure. He went onto say that as long as there was oil in the sump and it and the filter had been changed on time they very rarely gave trouble and if they did the sensor (which shuts the fuel off straight away) could never shut them down in time anyway so the engine was still ruined.

I had a sensor play up on my SV650, the dealer said if the bike was till running that it was the sensor and it would have only run for a matter of seconds before death.

SV8Predator

2,102 posts

196 months

Sunday 18th August 2013
quotequote all
Nigel Worc's said:

I don't know either ..... but it does.

How I know :

I have a 2000 E39 528i SE, which may have semi or fully sync oil, I run it on semi.

My friend has a 2002 325i, he put the same oil I do into his on an oil change (I've no idea why, but he did), and his is only specced at fully sync.

The car started ok, but after a minute or so, the oil light came on , but it was amber instead of red, a quick call by him to the dealer, and they told him he had the wrong grade of oil in it.

He changed the oil again, and all was well.
In this case though, it's a low oil level warning light.

anonymous-user

85 months

Sunday 18th August 2013
quotequote all
Nigel Worc's said:

I don't know either ..... but it does.

How I know :

I have a 2000 E39 528i SE, which may have semi or fully sync oil, I run it on semi.

My friend has a 2002 325i, he put the same oil I do into his on an oil change (I've no idea why, but he did), and his is only specced at fully sync.

The car started ok, but after a minute or so, the oil light came on , but it was amber instead of red, a quick call by him to the dealer, and they told him he had the wrong grade of oil in it.

He changed the oil again, and all was well.
That sounds like he didn't put enough oil in 1st time.
Amber is for low level,red for low pressure

Nigel Worc's

8,121 posts

219 months

Sunday 18th August 2013
quotequote all
V8covin said:
That sounds like he didn't put enough oil in 1st time.
Amber is for low level,red for low pressure
It was to the full line, I witnessed it myself, the dealer gave the advice I stated, it cured the "issue".

Low oil level, on that particular car, is indicated in text on a dot matrix display.

So who knows, it is just something I've seen, once.

Devil2575

13,400 posts

219 months

Sunday 18th August 2013
quotequote all
The amber light in my 2001 BMW 330i was a low level warning. It was faulty when I got the car and would come on just after start up and stay lit for about 2 minutes. It fixed it by replacing the sensor that sits in the sump. The sensor itself just detects when the top of it is exposed (it's a long and thin and sits vetically in the sump), but I could see how it might be sensitive to the wrong grade. It will depends on what it actually measures.

santona1937

Original Poster:

878 posts

161 months

Sunday 18th August 2013
quotequote all
thanks for all the replies,
after a morning of squeezing into electrical land I have solved the problem; the oil light is right above the washer light that is going on, somehow I was getting electrical bleedthru ( if thats poss) and when the washer bottle light came on it triggered the low oil light

Nigel Worc's

8,121 posts

219 months

Sunday 18th August 2013
quotequote all
That'll most likely be a poor 0v return on the actual lamp, assuming it is wired PNP, or a poor 12v feed if it is NPN.

You often see a similar problem with car tail lights, when the whole cluster lights dimly with the brake lights, or flashes dimly with the indicator, etc.

Scuffers

20,887 posts

305 months

Monday 19th August 2013
quotequote all
Devil2575 said:
The amber light in my 2001 BMW 330i was a low level warning. It was faulty when I got the car and would come on just after start up and stay lit for about 2 minutes. It fixed it by replacing the sensor that sits in the sump. The sensor itself just detects when the top of it is exposed (it's a long and thin and sits vetically in the sump), but I could see how it might be sensitive to the wrong grade. It will depends on what it actually measures.
that makes more sence..

if it's using this method of level sensing, I ca see an oil with different electrical characteristics will cause issues.