getting 6 yr old black faded paint like new
Discussion
about to get a black car for the kiddy and the paint is not 100%.....its almost (very slightly) blotchy/faded.....like its been sat in the sun too long!
anyway, is there an easy way to fix that with something from halfords! been a while since i cleaned a car so have no idea what i'd do!
anyway, is there an easy way to fix that with something from halfords! been a while since i cleaned a car so have no idea what i'd do!
I used this :
http://www.theultimatefinish.co.uk/gtechniq/p1-nan...
with just one coat by hand it resulted in this:

I then finished off with a coat of Autoglym SRP then a coat of wax and the difference was night and day, which was mainly down to the G1.
http://www.theultimatefinish.co.uk/gtechniq/p1-nan...
with just one coat by hand it resulted in this:

I then finished off with a coat of Autoglym SRP then a coat of wax and the difference was night and day, which was mainly down to the G1.
Tiggsy said:
so whats the proper process?
Wash - clay - polish - wipe down polish residue (another benefit of P1 is its water based so no REAL need for alcohol wide down, a damp cloth followed by a dry one is enough usually) and finally protect.... Waxes are a bit, erm, dated these days. I'm a big Gtechniq fan and love their new C2v3. So easy to use. E38Ross said:
Wash - clay - polish - wipe down polish residue (another benefit of P1 is its water based so no REAL need for alcohol wide down, a damp cloth followed by a dry one is enough usually) and finally protect.... Waxes are a bit, erm, dated these days. I'm a big Gtechniq fan and love their new C2v3. So easy to use.
As above but it really depends on what car its is and therefore paint hardness. For example if a VAG car you will probabky need a machine to make any difference because of hard paint. Tiggsy said:
ok so - wash, clay - p1 - c2v3
any special clay? - I'm just going to order what you guys say to get!
I use bilt hamber clay, I've got all 3 but most cars haven't been done before so maybe try either the medium or the firm clay. It's well priced for the size and the difference it makes is enormous. any special clay? - I'm just going to order what you guys say to get!
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



