Casio ATC 1000 DEAD. DECEASED. DEMISED.
Casio ATC 1000 DEAD. DECEASED. DEMISED.
Author
Discussion

205alive

Original Poster:

6,087 posts

207 months

Wednesday 21st August 2013
quotequote all
I thought I would treat my old 1995ish shelf-ridden triple sensor watch to a new NATO and a fresh set of batteries so I can start using it again, it having lain unused for years with the old batteries still in them.

New strap and batteries installed but no signs of life what so ever, but the multi tester shows a healthy 1.55v on each of the cells. Is there any chance of resurrection?

pastrana72

1,742 posts

239 months

Wednesday 21st August 2013
quotequote all
It is not dead me thinks, you need to reset it in the movement when fitting new batteries like you do with a g- shock.

Sorry I can not post links at present but if you goggle battery change on a g shock or look on YouTube for a instruction video it is likely you can get it going again.

Let us know if you make it rise from the dead.

Good luck.

205alive

Original Poster:

6,087 posts

207 months

Wednesday 21st August 2013
quotequote all
Aha, hope.

Thanks, will give it a whirl and update.

Had a look at a guide online, 'shorted' between the marked 'ac' tab and the +ive of one of the batteries but no change.

Actually, the two batteries - one has a circular cover, the other doesn't. I'll swap the cover from the right hand to the left battery, see of that changes anything. Can't hurt.

Edited by 205alive on Wednesday 21st August 20:19

205alive

Original Poster:

6,087 posts

207 months

Wednesday 21st August 2013
quotequote all
No signs of life yet, will see if there are any other suggestions online to indicate what the issue might be.

Of course, it's possible that the reason I stopped wearing it was because it died - it's a good while ago - but from memory it was just a battery issue (the old batteries still have a very slight charge according to the multi tester which I thought surprising).

bry1975

1,246 posts

194 months

Wednesday 21st August 2013
quotequote all
Don't forget you're testing the batteries off load so they will have some charge left.

205alive

Original Poster:

6,087 posts

207 months

Wednesday 21st August 2013
quotequote all
Are you referring to the old batteries, bry? Just to be clear, the fresh ones are showing what they should and the 20 year old ones (the originals which came with the watch, I should add) about .15 of a volt - just enough to tickle the meter into action. I was expecting them to be completely flat after that period.

Anyway, moot point - watch is lifeless...!