Pressure washers, water from bucket?
Discussion
You can use water from a water butt, as gravity will provide enough pressure, don't know about a bucket, I guess you could if you hung it up, drilled a hole in the bottom edge, and fitted a hozelock fitting.
Or just buy a garden sprayer if you are just wanting a bit of pressure to shift muck
Or just buy a garden sprayer if you are just wanting a bit of pressure to shift muck

You may need a large bucket, but it should work providing the orifice which the washer draws from is large enough and if you elevate the bucket, all the better.
Unless you have a tiddler, don't be tempted to use a long hose from the nearest tap as it probably won't flow enough.
At my last house, if I have any more than 2m of hose connected the pressure washer used to cut out through lack of flow in to my Karcher K6.85 which, ccording to the manual, requires a water flow of 11l/min. Mind you it does deliver 500lt/hr at 1800psi!
Unless you have a tiddler, don't be tempted to use a long hose from the nearest tap as it probably won't flow enough.
At my last house, if I have any more than 2m of hose connected the pressure washer used to cut out through lack of flow in to my Karcher K6.85 which, ccording to the manual, requires a water flow of 11l/min. Mind you it does deliver 500lt/hr at 1800psi!
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


