geometry settings

[cshaw4200]

Hi wondered if there was a definative set of geometry settings for the cerb looking at getting them checked but been to 2 places with hunter system cerb not in database found somewhere to go but need settings cheers

[GT6k]

Basic data is at the bottom of the equivalent parts thread http://www.alexjudd.com/cerbera/parts/

[Mr Cerbera]

Received these details from Micheldever...

[cshaw4200]

Thanks for the updated stats

[Jhonno]

Not much front camber...

[GT6k]

Mine had -0.5 camber when i got it and used to severely scrub the inner edges when on 18" wheels but i could see no evidence of inside edge wear after a year on 17" rims. My car has since been professionally setup and handles much better with no apparent tyre edge wear so far. A check with my camber gauge shows something like like -0.3 front camber but that is at the limit of the accuracy of my bubble driven camber gauge.

[Jhonno]

Scrub of inner edges could be the toe..

[flyingdutchie]

I used the data which is on the parts list and it is different from these figures? What is correct?

[Mr Cerbera]

flyingdutchie said:

I used the data which is on the parts list and it is different from these figures? What is correct?

Ask spitfire4v8

[flyingdutchie]

I mean the data here on this PH cerbera part. The equavalent parts list.