Discussion
I had similar problem on my drivers door.
If you remove the metal plate on the door catch area (3 screws on mine) you'll probably find that the switch is loose and if you align it and tighten it up (i also put a small piece of plastic behind it to stop it moving again!) it should be OK.
if it is the switch Maplin (maplin.co.uk) may have them as well as RS (rswww.com)
good luck!
Iain
If you remove the metal plate on the door catch area (3 screws on mine) you'll probably find that the switch is loose and if you align it and tighten it up (i also put a small piece of plastic behind it to stop it moving again!) it should be OK.
if it is the switch Maplin (maplin.co.uk) may have them as well as RS (rswww.com)
good luck!
Iain
Gassing Station | Tuscan | Top of Page | What's New | My Stuff