I have to have these wheels on beastie

[Chilliman]

http://www.azev.com/alufelgen/typ-a-nero-hp/

7.5 x 16 all round (which is what I've got on at the mo), ET25 front and rear moves the rears out (nearer the arches) by 7mm and the fronts by 6mm. Saw Andav's car a few months ago and he's got 10mm spacers front and rear with no problems so the 7mm and 6mm should cause no issues at all. (His car also looked the tits)

No reply from the UK supplier today but will call again on Monday for a price. I'll also ask if they can do discount for multiple orders (in case anyone else is interested).

It's the 'dish' look (and the polished outer rims). Gotta have it

Chilli

[jamienshelly]

Very nice mate!
I nearly put an offer in on these on the bay, I think they are nice

http://www.ebay.co.uk/itm/Braid-18-split-rim-kit-c...

[chapperssx]

Chilli some of my wedge brothers have used the Azev A's and must say they looked the nuts !! For the rears are you going for the 16x9's deep dish ? Always thought they look great on the Chimaera, hope you post a few pics..

[Chilliman]

chapperssx said:

Chilli some of my wedge brothers have used the Azev A's and must say they looked the nuts !! For the rears are you going for the 16x9's deep dish ? Always thought they look great on the Chimaera, hope you post a few pics..

Hi Chappers, was planning on sticking with 7.5" all round, although I guess 9" on the back would look rather mean I have a nasty feeling these wheels are going to be a trifle on the expensive side!!! Still, If I went for them I'd have two sets of Estorils I could maybe sell to offset the cost

[phazed]

7.5" all round, you cannot be serious, wake up Richard!

If you are shelling out for new you want at least 8s on the front and 9s on the rear.

[SILICONEKID343HP]

Got some nice one`s on classifieds , new boxed ,they are a bargain ,The plan was to get them painted in silver or anthracite , it`s worked out to expensive

These are not Chinese copies like the above ,they are proper light weight track/road wheels .

Team Dynamics pro race 1.2

2x 17" 9" Rim ET(offset) 35 4x108

2x17" 7" Rim ET(offset) 25 4x108

A combination of 215/14/17 and 245/40/17 would be perfect ,or you could go up a size.

Edited by SILICONEKID343HP on Monday 23 September 08:53

[phazed]

Chineese?

[Chilliman]

phazed said:

7.5" all round, you cannot be serious, wake up Richard!

If you are shelling out for new you want at least 8s on the front and 9s on the rear.

Here we go again. The suspension decisions are bad enough, now we're adding wheel widths to it OK, I'm up for this, the never ending quest to modify continues So, what about diameters and offsets Peter? And tyres/tyre sizes? Any idea what the wheel style choices are? The Azevs are either 7.5 or 9 Should I be thinking about 5 stud hubs with so much rubber on the road?

Oh well, that's the 911 turbo daily down the drain for another year

[phazed]

5 studs;

[Sardonicus]

Might be worth a call Chilliman to see what he can do I do like a dished wheel rather than a flat face call me old school but I always liked the RS wheels with the polished rim these are only 6x13 but always looked wider because of the rim

http://www.ebay.co.uk/itm/AZEV-A-DISHED-ALLOY-WHEE...

Edited by Sardonicus on Monday 23 September 09:45

[Rib]

I live these, in fact I bought a set off a chimaera owner, looked great on the car HOWEVER please check the centre bore size before you buy any, this guy jad fitted them with 10mm spacers as the centre hole was too small, therefore was not on the centre locater, probably be fine for average road use but I didn't fancy it! Will try and find some pics for you.

[Rib]

Hopefully this will work, I did also get 2 10j veeeery deep dished ones for the rear but the offset didn't let it fit.

[Rib]

Now I have a marmite car lol but these wheels were much better, lighter, stronger, better fit and also loads of clearance for future brake upgrades

[brett84]

i've got Azev A's on mine and love them
17" all round with larger tyres on the rear

[Chilliman]

brett84 said:

i've got Azev A's on mine and love them
17" all round with larger tyres on the rear

Pics????

[Chilliman]

Rib said:

Now I have a marmite car lol but these wheels were much better, lighter, stronger, better fit and also loads of clearance for future brake upgrades

Thanks for the heads up ref the centre diameter Rib That last photo is superb

Chilli

[brett84]

[phazed]

I must say that the Asevs lookin keeping with the age and style of the car, one of my favourites.

These are similar and very nice too.

http://www.imagewheels.co.uk/large_wheel_pages/b40...

[brett84]

the image ones are what I will get next year I think so I can run wider on the back. They are about £2k a set though

[phazed]

brett84 said:

the image ones are what I will get next year I think so I can run wider on the back. They are about £2k a set though

Yep, that's what I've been told!

Wanna buy mine with tyres for £1500