S1 E-type voltage regulator
Author
Discussion

427James

Original Poster:

628 posts

242 months

Tuesday 8th October 2013
quotequote all
Hi guys, I am putting my 64 4.2 FHC back together (in truth it was a wreck not run for 20 years with a lot of missing parts). I am trying to work out the location and placement of the voltage regulator next to the heater box (its LHD if that makes a difference).

Can anyone help by providing a picture of theirs? The books I have seem pretty crap for this. I have given up on working out where the radiator fan motor is bracketed from.


grumpy52

6,055 posts

195 months

Wednesday 16th October 2013
quotequote all
You need a book called The Complete E Type (I think) it is the geeks /anoraks guide to the car and lists all changes to equipment and specs and photos of everything e type. Good luck finding one though .
Your reg was fitted under the heater box , as for the rad brackets I cannot help.
I am not a jag expert but know a mk2 and e type specialist .

lowdrag

13,183 posts

242 months

Wednesday 16th October 2013
quotequote all
There are two specialist books, neither of which are in print, so search diligently because the price can differ by literally hundreds of pounds.

The first big book in hardback is Philip Porter's bible called "E-type. The definitive history". You can find it here:-

http://www.amazon.co.uk/Jaguar-Type-Definitive-Bri...

The second, rather mythical for some obscure reason, is "Jaguar six-cylinder restoration and originality guide" by Dr. Thomas F. Haddock. It's a paperback A4 size, and I've had my copy of both since the publication. This last book is American and for some reason prices went through the roof a few years back. However, a quick Google found that it is now within the realms of sanity again:-

http://www.abebooks.co.uk/servlet/SearchResults?is...

But to answer you question, the voltage regulator is fixed underneath the heater box facing the bonnet catch, if you get what I mean.

427James

Original Poster:

628 posts

242 months

Friday 25th October 2013
quotequote all
Thanks guys.


DaveEssex

252 posts

186 months

Friday 25th October 2013
quotequote all
There is of course another alternative, and that is to replace the dynamo with an alternator. Did this when I restored my XK140, cost about £50.00. This way you do not need a voltage regulator, and the output is sure to be higher than your old dynamo. There are of course suppliers of alternators that are look-a-like dynamos, with all said advantages, but at a cost more like £170.00.

SESH

129 posts

191 months

Friday 25th October 2013
quotequote all
Or join the E Type Forum...............

http://etypeuk.com/forum/