Oil pressure gauge sender unit

[Steven G]

If you need a new oil pressure gauge sender unit I suggest that you have a look at these from Hose Fittings UK.
"Universal Engine 1/8 NPT Oil Pressure Sender Sensor".
This unit has two connection, so you may have to run an additional earth wire, but it works well and is 7 Bar (100 psi) so is well match to our gauges.
Steve.

[phillpot]

Hi Steven, always good to find alternative suppliers of parts but this one has been covered quite a bit over the years


Search Forum

[swimmer27]

As phillpot has mentioned (I'm one of the early posts) I purchased one that had the two connections but I had no luck with it so purchased one from
http://www.davidgeraldtvr.com/parts.asp
and all was well again.

[glenrobbo]

I fitted one of the Hose Fittings UK senders in March? 2012 & it works perfectly, just needs an extra bit of cable to a good earth.
£15 inc. next day delivery; can't be bad