Plastic clip holding the clutch cylinder rod to the fork

[Mr Plow]

Hi All

How do I remove this to get the rod away from the clutch fork. I'm currently working through the inspection hole so can't see a lot.

It looks like it just clips on and should come off fairly easily with a little presuasion from a screwdriver, I don't want to force it though.

Any help apprecaited as always.

Cheers

[spend]

Slides towards the centre of input shaft to release. & Pushes outwards to attach.

[TVR Beaver]

It's getting it back on that's the interesting bit

best of luck !!

[Sardonicus]

TVR Beaver said:

It's getting it back on that's the interesting bit

best of luck !!

Not as bad as getting those little slippers on the release arm located in the release bearing carrier ............

[gacksen]

Sardonicus said:

ot as bad as getting those little slippers on the release arm located in the release bearing carrier ............

took me 3 hours and felt like fishing in the dark.... won´t ever touch it again

[TVR Beaver]

I managed to get them on okay.. but could not get my fingers / hands into do the clip.. which in turn pulls them things back off also. not the best of jobs as you can see sod all once your hands are in there... but doable... Just ... have some plasters ready