Damper bolt length

[TuxMan]

If anyone is near there Noble can you measure the top and bottom damper bolt length and post it up . My can is at Jetstream and I need new bolts to fit new Protech dampers .

Thanks Tux

[Hollowpockets]

I can check my originals when I get home tonight, if someone else does, remember the top/bottom bolts are different sizes.

By the way tux, watched some of the Porsche toyo tyres cup today and it looks great fun!

[TuxMan]

Thanks G , think the top is M12 and the bottom is 1/2"unf it's just the ength I need :-)

[NobleMartin]

Hi Tux
Top bolt is 3.2inches long but could save weight by cutting down to 2.750 and still take original nut length.
Bottom bolt is 2.25 inches long, same applies , would be ok at 2.25 and still take original nut length.
Martin

[NobleMartin]

Sorry Tux
Bottom bolt was2.5 and will cut down to 2.25 its an age thing !!!

[TuxMan]

Thanks Martin , perfect !! I normally have loads but for some reason I have run out !!!