pd diesel engine fault
Author
Discussion

mfranklin140

Original Poster:

5 posts

156 months

Tuesday 5th November 2013
quotequote all
Hi this is my first time on here l. I have a 54 plate passat tdi with the 130 bhp the engine and 6 speed box. I was returning from a day out on Sunday and o the way back the engine was misfiring badly so badly I couldn't rev over 2k but when the engine is cold it runs like a dream but once it has started misfiring it even does it in tick over. Any advice would be greatly appreciated

mk1fan

10,919 posts

256 months

Tuesday 5th November 2013
quotequote all
Sounds like a sensor has failed. Getting the car scanned would be a good place to start.

phumy

5,829 posts

268 months

Tuesday 5th November 2013
quotequote all
check the camshaft some of the early pd models, especially the 150bhp were like chocolate, i know cos i had one melt on me and that misfired at revs and idled ok.

Nick1point9

3,920 posts

211 months

Tuesday 5th November 2013
quotequote all
phumy said:
check the camshaft some of the early pd models, especially the 150bhp were like chocolate, i know cos i had one melt on me and that misfired at revs and idled ok.
Highly unlikely given that it's fine when cold.

X1/9

67 posts

218 months

Tuesday 5th November 2013
quotequote all
Might be worth getting the injector wiring loom checked, it's inside the cylinder head and your symptoms sound about right for it breaking down.

mfranklin140

Original Poster:

5 posts

156 months

Tuesday 5th November 2013
quotequote all
Hi have put it on my brothers cide resder and it's saying thst injector 2 has a open circuit and the egr valve has insufficient flow any ideas what these could mean.

mfranklin140

Original Poster:

5 posts

156 months

Tuesday 5th November 2013
quotequote all
Hi have put it on my brothers cide resder and it's saying thst injector 2 has a open circuit and the egr valve has insufficient flow any ideas what these could mean.

Deerfoot

5,259 posts

215 months

Wednesday 6th November 2013
quotequote all
I had an open circuit injector on my Polo PD 130. It wasn't expensive to replace. It only illuminated the engine dash light though, there were no other symptoms.

mfranklin140

Original Poster:

5 posts

156 months

Wednesday 6th November 2013
quotequote all
What did you have to replace to fix it

mk1fan

10,919 posts

256 months

Wednesday 6th November 2013
quotequote all
The EGR is probably gummed up with soot/oil/crap.

The EGR fault can be sorted by removing the EGR system (Darkside Developments and Allard do kits for doing this) which will also need the ECU coding to ignore the (now removed) system.

You could also replace the EGR valve. Or clean it out.

To be honest removing the EGR is the better option as it means no future problems. Indeed, I'm doing one this weekend (along with a de-cat pipe and braided oil feed for the turbo). Potentially, there's also more power and better MPG after removing it.

The injector sensor can be swapped out readily enough.

Deerfoot

5,259 posts

215 months

Wednesday 6th November 2013
quotequote all
mfranklin140 said:
What did you have to replace to fix it
They replaced the injector.

X1/9

67 posts

218 months

Wednesday 6th November 2013
quotequote all
It's pointing towards the 'head wiring loom with the open circuit fault

Salesy

850 posts

160 months

Saturday 16th November 2013
quotequote all
I Have a 55 plate VW T5 and started to have this fault about a month ago although mine brought up CYL1 misfire on vagcom. I was told its likely to be an injector but change the loom first. I changed to loom £45 and an hour of my time..... Problem solved

Here come the weird bit i have an 01 Golf GTTDI 115 and this week the traction light come on when up to temp. So a trip to my indie and vagcom to look at the traction and ABS system..... No faults.
Checked the management system and it said CYL1 misfire. This time though i was told likely to be the loom. This time £50 and 50 mins of my time.

Both car and van run like a dream now, but how spooky is that to have 2 wiring looms go in the space of a month.

The missus has now said the golf is doomed and she doesn't trust it on long journeys so this weekend were off to look at some Mk6 GT tdi's


seatdriver357

20 posts

156 months

Sunday 24th November 2013
quotequote all
Without a shadow of doubt it's the injector loom and most likely cylinder one, the fault Code will indicate over current,
Easy fix, remove rocker cover, reseating the injector plug will last a while but ideally you want to get a fine screw driver and bend the connection so you get a better connection.
Had the same fault on my130pd Toledo and thus worked treat over two years ago, basically the injector plug was just sitting there and every two three months I got the same misfire.