Corner Weights
Discussion
951 said:
Hi chaps,
Does anyone that has had their car corner weighted have the actual weights for each corner?
Alternatively, does anyone know the rough front:rear weight distribution?
Would Fr:Rr of 40:60 be about right?
Thanks
Graham
Hi Graham, depends on the overall weight of your car but hope this helps -Does anyone that has had their car corner weighted have the actual weights for each corner?
Alternatively, does anyone know the rough front:rear weight distribution?
Would Fr:Rr of 40:60 be about right?
Thanks
Graham
mine around a year ago

the issue with GTO600, Hollowpockets and my car is that they are all a very very long way from standard, for example Kev has carbon wheels and no air con, grahams is stripped to bear essentials with moved battery etc and mine has a single turbo and various carbon panels... all these mods move the weight around slightly

the issue with GTO600, Hollowpockets and my car is that they are all a very very long way from standard, for example Kev has carbon wheels and no air con, grahams is stripped to bear essentials with moved battery etc and mine has a single turbo and various carbon panels... all these mods move the weight around slightly
This is mine from centre gravity last month, standard in the way that nothing has been removed from the car, full tank of fuel, speedline wheels with pilot cup tyres. If anything, I've added weight due to extra coolers etc.
[url]
|http://thumbsnap.com/EynlHRdZ[/url
With an empty fuel tank car would have been close to its quoted 1080kg.
With me in the car total weight went up to 1225 kg with the following corner weights:
Front Left: 237kg
Front right: 256.5kg
Rear left: 354.5kg
Rear right: 376.5kg
[url]
With an empty fuel tank car would have been close to its quoted 1080kg.
With me in the car total weight went up to 1225 kg with the following corner weights:
Front Left: 237kg
Front right: 256.5kg
Rear left: 354.5kg
Rear right: 376.5kg
Thanks for all the answers guys!! 
So, I take Andy's point about differences between cars, but it looks like 60% at the back is a pretty decent average for total weight distribution.
I actually want to try to estimate sprung weight, so I need to estimate the unsprung weight - which will also vary with wheels & tyres of course.
I'll initially guess between 100 and 150 lbs per corner - closer to 100 at the front and to 150 at the back, but not sure.
Any takers?
Thanks again!

So, I take Andy's point about differences between cars, but it looks like 60% at the back is a pretty decent average for total weight distribution.
I actually want to try to estimate sprung weight, so I need to estimate the unsprung weight - which will also vary with wheels & tyres of course.
I'll initially guess between 100 and 150 lbs per corner - closer to 100 at the front and to 150 at the back, but not sure.
Any takers?
Thanks again!
Gassing Station | Noble | Top of Page | What's New | My Stuff


