Started the Winter Projects

[pinchmeimdreamin]

Well decide now is the time to take Cherry off the road for the winter and sort out the interior and a couple of other little bits.




Showing her age inside.




So the strip down begins








One major worry.. ( opinions gratefully recieved)





And a bit of TVR normality.



However Finally got all the old carpet out after many minutes of will I be able to remember how to put it all back together moments.





.


So no turning back now

[vaurien]

Is - Status ..."made by TVR"...





under the "dashboard".....













alternativ.......


muck out.......



tidy.......



removed......

[b]on this way to exchange the heat-exchanger-pipe better too for one
stainless steel[/b]















casing are maded from stainless steel with neopren - isolation and A4-80 fastener


Regards


Gregor

[s p a c e m a n]

Your ecu looks like the batterys been leaking on it, what does the white stuff taste like?

[QBee]

s p a c e m a n said:

Your ecu looks like the batterys been leaking on it, what does the white stuff taste like?

Agreed. That's what mine looked like when the battery was boiling over. Tasted of acid. Time to change the battery and get a pro to check the charging.

[vaurien]

Sorry....but objetcion....the same picture you will get if the ECU/it´s carpet/areal is longtime wet.

Over the ECU is the old heat-exchanger with old pipes, old hose clamps and oldrubber hoses.
All slowly worn-out and rosted.

Certainly also the battery can be a reason but check the heating too to be sure.







Regards from far....


Gregor

[caduceus]

pinchmeimdreamin said:

Well decide now is the time to take Cherry off the road for the winter and sort out the interior and a couple of other little bits.

So no turning back now

Great work so far! Looking forward to seeing the progress and end result. Love seeing Tivs getting the TLC they deserve

[caduceus]

vaurien said:

Is - Status ..."made by TVR"...






Gregor

Love this! I would really like to have a go at doing this with a Chimaera. Renew all the wiring and fix it in neatly.

Did you take many photos of the installation Gregor?

[Hoofa]

Where did u get the stainless heater pipes ?, wish someone would make em as they rot

[SILICONEKID343HP]

vaurien said:

Is - Status ..."made by TVR"...





under the "dashboard".....













alternativ.......


muck out.......



tidy.......



removed......

[b]on this way to exchange the heat-exchanger-pipe better too for one
stainless steel[/b]















casing are maded from stainless steel with neopren - isolation and A4-80 fastener


Regards


Gregor

Why not start your business in the UK ,your work is phenomenal Should of done it like that in the factory .

[caduceus]

SILICONEKID343HP said:

Why not start your business in the UK ,your work is phenomenal Should of done it like that in the factory .