Seiko diver getting a loose bezel...
Discussion
Morning all. Would anyone happen to know whether it's possible to tighten the bezel movement on a seiko diver?
My old faithful is now at the point where even a shirt cuff can nudge it round a few clicks, which I find massively irritating.
Is this common and is it easily remedied? If so, can I do it myself??
My old faithful is now at the point where even a shirt cuff can nudge it round a few clicks, which I find massively irritating.
Is this common and is it easily remedied? If so, can I do it myself??
bry1975 said:
Hi,
The part you'll need is ref Seiko OZ3314B02 MAKE SURE you grease the o ring prior to refitting the bezel otherwise the gasket is likely to crimp/jamm up.
Bry
Thanks Bry - is this a relatively painless operation?The part you'll need is ref Seiko OZ3314B02 MAKE SURE you grease the o ring prior to refitting the bezel otherwise the gasket is likely to crimp/jamm up.
Bry
I've never taken a watch apart so don't want to damage anything…Is there a good online guide anywhere to doing it?
Don't bother with jewellers most are only interested in sales most aren't repairers etc.
Ring Steve Burrage he'll do it for you probably be £20 or something.
0116 267 7673 www.rytetimewatchrepairs.co.uk/
Ring Steve Burrage he'll do it for you probably be £20 or something.
0116 267 7673 www.rytetimewatchrepairs.co.uk/
bry1975 said:
Don't bother with jewellers most are only interested in sales most aren't repairers etc.
Ring Steve Burrage he'll do it for you probably be £20 or something.
0116 267 7673 www.rytetimewatchrepairs.co.uk/
Thanks bry1975 - will do so. Appreciated!Ring Steve Burrage he'll do it for you probably be £20 or something.
0116 267 7673 www.rytetimewatchrepairs.co.uk/
Gassing Station | Watches | Top of Page | What's New | My Stuff



