Hard pipe kits
Discussion
I'm thinking about fitting a hard pipe kit, everyone seems to be pointing me towards Pro Alloy, but are there other other options?
Material.
I'm presuming the pipes are alloy, but some of them are highly polished and look like they are stainless steel?
Bends.
Some of the pipes coming from the front bank into the intercooler have a bend/join in them some are straight?
Is this determined by the intercooler you have? (I’ve got a Noble Motorsport Intercooler)
Intercooler exit/ Air intake.
Some of them look bigger than others, some also look like they have dump valves and feed off..
Can someone educate me.
I've also been reading some old post's about putting the air filters into the side pods has anyone done this and got some photos.
Material.
I'm presuming the pipes are alloy, but some of them are highly polished and look like they are stainless steel?
Bends.
Some of the pipes coming from the front bank into the intercooler have a bend/join in them some are straight?
Is this determined by the intercooler you have? (I’ve got a Noble Motorsport Intercooler)
Intercooler exit/ Air intake.
Some of them look bigger than others, some also look like they have dump valves and feed off..
Can someone educate me.
I've also been reading some old post's about putting the air filters into the side pods has anyone done this and got some photos.
Edited by Pilot Pete on Saturday 16th November 01:54
Gassing Station | Noble | Top of Page | What's New | My Stuff