Audi CVT transaxle into a Citroen DS - Tame Tech
Discussion
Hi,
I'm new here and this is my very first post.
What took me here is a web search on the Audi CVT. My hobby is to transplant engines into vintage cars. My three previous projects were on vintage Mercedes (5.0L M117 V8 with manual trans into a '62 W111 Coupe, and a 5.6L + manual trans. into a W113).
Time has come for a new project and the base will be a Citroen DS. I love that car, I own several. This is a special car that always lacked an engine. So I want to transplant a Mazda rotary in it. Reason is that I want to put an engine as crazy as the rest of the car is. Citroen did develop a rotary engine, but they never really finished its development (as found on the GS birotor for ex.). For the transmission, I would like it to be a CVT. I think that a rotary with a cvt in a Citroen DS would reinforce the "flying carpet" feeling while driving it. But it needs to be a transaxle so that I can fit the inboard brakes. My plan is to fit the rotary in the front with the CVT transaxle right behind it, like on Audis (The DS original lay out is with the transmission in the front and the engine half into the passenger compartment - quite crazy with such a long bonnet!). From my search on the web, I think only Audi makes a CVT transaxle that would fit my project. But I got quite scared when I started reading about all the problems. Apparently the question is not if the trans will develop a problem, but when. So here are my questions:
- is there a model/year that would be more reliable? I saw that the 0AW transmission has its axles more forward, and may be an option for me if I go with a tri-rotor. Is it more reliable?
- How much power and torque can the Audi CVT handle? That will help me decide on which rotary I will be using. I would like to fit a 20b which is a twin turbo with 280hp and 40 kg of torque. Can the Audi CVT handle that?
- I don't know exactly what input the ECU needs, but I guess I will have a hard time duplicating that info out of a non Audi engine. Is there an aftermarket programmable ECU that can be used on these trans? Or an interface between the engine and the trans ECU that I could program in order to foul the ECU?
- Apparently the biggest faults on these trans are input shaft/clutch and ECU. Is there a way to make them a bit more reliable?
- Is there another CVT transaxle on the Market?
Sorry for the long post, and thanks in advance for the help.
I'm new here and this is my very first post.
What took me here is a web search on the Audi CVT. My hobby is to transplant engines into vintage cars. My three previous projects were on vintage Mercedes (5.0L M117 V8 with manual trans into a '62 W111 Coupe, and a 5.6L + manual trans. into a W113).
Time has come for a new project and the base will be a Citroen DS. I love that car, I own several. This is a special car that always lacked an engine. So I want to transplant a Mazda rotary in it. Reason is that I want to put an engine as crazy as the rest of the car is. Citroen did develop a rotary engine, but they never really finished its development (as found on the GS birotor for ex.). For the transmission, I would like it to be a CVT. I think that a rotary with a cvt in a Citroen DS would reinforce the "flying carpet" feeling while driving it. But it needs to be a transaxle so that I can fit the inboard brakes. My plan is to fit the rotary in the front with the CVT transaxle right behind it, like on Audis (The DS original lay out is with the transmission in the front and the engine half into the passenger compartment - quite crazy with such a long bonnet!). From my search on the web, I think only Audi makes a CVT transaxle that would fit my project. But I got quite scared when I started reading about all the problems. Apparently the question is not if the trans will develop a problem, but when. So here are my questions:
- is there a model/year that would be more reliable? I saw that the 0AW transmission has its axles more forward, and may be an option for me if I go with a tri-rotor. Is it more reliable?
- How much power and torque can the Audi CVT handle? That will help me decide on which rotary I will be using. I would like to fit a 20b which is a twin turbo with 280hp and 40 kg of torque. Can the Audi CVT handle that?
- I don't know exactly what input the ECU needs, but I guess I will have a hard time duplicating that info out of a non Audi engine. Is there an aftermarket programmable ECU that can be used on these trans? Or an interface between the engine and the trans ECU that I could program in order to foul the ECU?
- Apparently the biggest faults on these trans are input shaft/clutch and ECU. Is there a way to make them a bit more reliable?
- Is there another CVT transaxle on the Market?
Sorry for the long post, and thanks in advance for the help.
Awesomely bonkers idea. I have no idea about any of the questions you've asked, but have a couple of my own; putting the engine in front is going to mess with the weight distribution big-time even if it is a nice compact and light thing like a rotary(that said the bells and whistles attached are not so compact), why not mount as per the original? If the Audi diff can be flipped this would be a goer. Alternatively can the Audi box be inverted without killing it or needing complex work to maintain lubrication?
Yes, awesomely bonkers, that's the idea. The DS is half bonkers already, I'm just trying to finish the job!
Nice and valid questions you have. The weight distribution may indeed be altered a bit, but not that much. Keep in mind the spare wheel on a DS is already quite heavy and is right in the front. In case of need, I can transfer the spare wheel and the battery in the back and I guess it will take care for a good part of the weight distribution alteration. The Mazda rotary is small and lighter than the DS engine. The DS was originally designed to receive a flat six engine in front of the front wheels, a bit like the 2CV but with more cylinders. They never finalized the engine so they recycled the Traction AV engine. The result is that it's half into the passenger compartment despite a bonnet that looks like an airplane carrier. So I am intending to go back to the lay out the car was originally designed for, and free all that space for the front passenger legs.
So for now, my plan would be to keep the Audi CVT the way it is in Audis.
Nice and valid questions you have. The weight distribution may indeed be altered a bit, but not that much. Keep in mind the spare wheel on a DS is already quite heavy and is right in the front. In case of need, I can transfer the spare wheel and the battery in the back and I guess it will take care for a good part of the weight distribution alteration. The Mazda rotary is small and lighter than the DS engine. The DS was originally designed to receive a flat six engine in front of the front wheels, a bit like the 2CV but with more cylinders. They never finalized the engine so they recycled the Traction AV engine. The result is that it's half into the passenger compartment despite a bonnet that looks like an airplane carrier. So I am intending to go back to the lay out the car was originally designed for, and free all that space for the front passenger legs.
So for now, my plan would be to keep the Audi CVT the way it is in Audis.
I cant even imagine how much of a nightmare that is going to be.
software is going to be a huge problem, audi CVT is design to be networked with Audi engine ECU and ABS ecu, to get the require signals to calculate the requires gear ratio, its all software.
No idea how you would make it work. Sorry
software is going to be a huge problem, audi CVT is design to be networked with Audi engine ECU and ABS ecu, to get the require signals to calculate the requires gear ratio, its all software.
No idea how you would make it work. Sorry
I have some experience with programmable ECUs having Megasquirted one of my engines (originally K-jet). I know there are some aftermarket transmissions ECUs, though I have no experience with them. With all the ECU problems Audi got with its CVT, I was wondering if there was an aftermarket ECU available for these transmissions? Possibly programmable?
NO i've never seen a programable, or even a patern replacement ecu for that matter.
Its one of those things where there just isnt a market. You might be the first person ever who has thought, I know I want to fit one of them audi multi tronic box's.
Where as, there will be millions of people wanting to remove it and swap to manual, so info on how to do this will be out there.
Sorry I cant be of any more help.
Its one of those things where there just isnt a market. You might be the first person ever who has thought, I know I want to fit one of them audi multi tronic box's.
Where as, there will be millions of people wanting to remove it and swap to manual, so info on how to do this will be out there.
Sorry I cant be of any more help.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


