T350 heater circuit board connection

[NWTony]

I tried to fix my heater amplifier board by wiring it directly, thinking the connection was knackered. Turned out it wasn't

Anyway I have the board repaired and I'm almost mostly certain I kept the plug I cut off so I can match up the wiring, but just in case, can somebody post a pic of their's or maybe just tell me which wires to which pins.

Many thanks!

[kevin63]

I took a couple of photos for Pursyluv but they aren't too good, they can be found here http://www.pistonheads.com/gassing/topic.asp?h=0&a...

[Pursyluv]

Modest as ever Kev and it still works perfectly.

It will get a good test tomorrow as the top is coming off whatever the temperature

[NWTony]

Thanks for that

I know I should have kept the plug, I mean only an idiot would cut of a plug and not keep it right?

[NWTony]

Just to update you all. Did not keep the plug or more likely, kept the plug in a very, very safe place...

But thanks to the pics here and the ones in the Sagaris bible we were able to work out the wiring and the heater works a treat. You don't realise how much you missed it until it's back.

Thanks again for the help.