best way to remove the inevitable scratches on the gearstick
best way to remove the inevitable scratches on the gearstick
Author
Discussion

franki68

Original Poster:

11,660 posts

251 months

Sunday 17th November 2013
quotequote all
Just typical wedding ring scratches ...

any help ?

AstonTony

1,128 posts

197 months

Sunday 17th November 2013
quotequote all
franki68 said:
Just typical wedding ring scratches ...

any help ?
A divorce biglaugh

KarlFranz

2,008 posts

300 months

Sunday 17th November 2013
quotequote all
…or get a LHD car.

DangerMonkey

590 posts

246 months

Sunday 17th November 2013
quotequote all
But then you'd be looking for the best way to remove the inevitable scratches on the door handle

divetheworld

2,565 posts

165 months

Sunday 17th November 2013
quotequote all
Its a satin finish. Polishing would not work, you need to chemically etch or fire abrasives at it.

Or leave it.....

franki68

Original Poster:

11,660 posts

251 months

Sunday 17th November 2013
quotequote all
AstonTony said:
A divorce biglaugh
I was thinking a cheaper solution.

franki68

Original Poster:

11,660 posts

251 months

Sunday 17th November 2013
quotequote all
divetheworld said:
Its a satin finish. Polishing would not work, you need to chemically etch or fire abrasives at it.

Or leave it.....
I'm sure someone mentioned smokers toothpaste or something similar a while back.

divetheworld

2,565 posts

165 months

Sunday 17th November 2013
quotequote all
franki68 said:
I'm sure someone mentioned smokers toothpaste or something similar a while back.
Toothpaste 'can' be a mild abrasive like Jif/Cif cream. You'll likely spoil it and then be looking for an etcher.
Its aluminium. My advise is to find somewhere that does anodising and ask them to refinish it silver.

hornbaek

3,834 posts

265 months

Sunday 17th November 2013
quotequote all
Its a bit like stainless steel kitchen tables. The first scratches are always the worst. Thereafter it is called patina!

KarlFranz

2,008 posts

300 months

Sunday 17th November 2013
quotequote all
I believe the shifter is covered in clear lacquer (similar to the shiny grille) in which case no amount of metal polish will make a difference. But I disagree with the idea that it is "inevitable". The best thing to do is avoid getting them in the first place: remove any jewelry, wear a glove, or grip the shifter differently. Otherwise deal with the scratches or replace the shifter.

franki68

Original Poster:

11,660 posts

251 months

Sunday 17th November 2013
quotequote all
KarlFranz said:
I believe the shifter is covered in clear lacquer (similar to the shiny grille) in which case no amount of metal polish will make a difference. But I disagree with the idea that it is "inevitable". The best thing to do is avoid getting them in the first place: remove any jewelry, wear a glove, or grip the shifter differently. Otherwise deal with the scratches or replace the shifter.
The car came with them, and it doesn't really bother me , just didn't have much on , so thought I'd give it a try. , but I'll just leave it