sourcing/tuning the audi 5cyl 20v turbo AAN engine (s4/s6)
sourcing/tuning the audi 5cyl 20v turbo AAN engine (s4/s6)
Author
Discussion

nickson

Original Poster:

219 posts

191 months

Sunday 17th November 2013
quotequote all
can anyone point me in the direction of a company in the uk that can help tuning/building one of these engines as found in audi ur Quattro, early s4/s6 2.2 20v turbo 5cyl.

I need to source one and tune to 500bhp ish

many thanks
nick

Yertis

19,745 posts

297 months

Sunday 17th November 2013
quotequote all
nickson said:
can anyone point me in the direction of a company in the uk that can help tuning/building one of these engines as found in audi ur Quattro, early s4/s6 2.2 20v turbo 5cyl.

I need to source one and tune to 500bhp ish

many thanks
nick
Well for a start any urQuattro you might find with an AAN has had it transplanted in from an urS4/S6, which were the only cars fitted with that engine. Finding an AAN will usually involve finding a urS4/S6 and ripping its heart out, which is a shame as those are lovely cars in their own right. It's not a straight drop into the urQuattro, if that's what you were thinking of doing - although the engine itself is basically the same the ancillary stuff is not. For tuning I would be thinking of going to Dialynx (Swindon) or QST (Sussex) but I'm not sure if QST still do this kind of stuff. MRC tuning also?

The AAN is a glorious, fabulous engine – good luck. But bear in mind that at high mileages (ie >200k) the heads tend to crack, so make sure you know what you'd getting into.

AndyS2

869 posts

289 months

Monday 18th November 2013
quotequote all
Register and ask on here:-

http://www.s2forum.com/

The best source of information on the I5 engine. For engine builders I'd go with Aelred Smith, or VRS

http://www.vrsnorthampton.com/index.php

For tuning, there are very few people who know how to tune the Bosch ECU correctly, mine was done by Mark Hardy aka Automark

http://www.automarkuk.com/

ManOpener

12,467 posts

200 months

Monday 18th November 2013
quotequote all
Don't think the AAN was ever fitted to the Ur Quattro. The RR 20v is different from the AAN in numerous ways, being more similar to the 3B in the early Audi S2.

The AAN (S4/6) and ABY (later S2) are exactly the same engine AFAIK. The biggest difference between the earlier and later engines is the change from distributor to coilpacks but there are quite a few internal differences.

Have an ask around on the S2 Forum and RS246. I don't know of any tuners off the top of my head apart from MTM/QST and 034 Motorsport, but I do know a bit about the engines as a mate of mine ran one at ~400bhp for a few years. Standard conrods limit torque to about 350lb ft, so for a 500bhp build you'd need new rods. Lots of people do replica or pattern RS2 parts, or other upgrades to inlet and exhaust manifolds which are built for this kind of power. There are two schools of thought with the turbo- newer Garrett ball-bearing turbo bolt-on kits (034 Motorsport do all-in-one kits up to about 600bhp) which are more efficient and less laggy, but are more expensive, or the old-school thrust-bearing type huge KKK turbochargers like those used on the S1 Quattro, which is the opposite.