Rolling road on my Skoda Octavia VRS....
Discussion
Went to South West Car In Tech today for a dyno test. I was expecting to be somewhere near 200bhp, but end result's showed Run 1, 192 BHP engine power, 290 ft lb of torque/393NM, 145.5 BHP at the wheels, Run 2 see below. Pretty impressive, it is very aggressive when foot to the floor.
Overall I'm happy with the results, don't want to cook the turbo out with 212 BHP!
Video:
http://www.flickr.com/photos/50322684@N02/10930176...
Printout 1 and 2:
Run 1:

IMG_1177 by Zuhayb Pics, on Flickr
Run 2:

IMG_1171 by Zuhayb Pics, on Flickr

IMG_1175 by Zuhayb Pics, on Flickr
Overall I'm happy with the results, don't want to cook the turbo out with 212 BHP!
Video:
http://www.flickr.com/photos/50322684@N02/10930176...
Printout 1 and 2:
Run 1:

IMG_1177 by Zuhayb Pics, on Flickr
Run 2:

IMG_1171 by Zuhayb Pics, on Flickr

IMG_1175 by Zuhayb Pics, on Flickr
Edited by Zuhayb on Monday 18th November 23:15
seems reasonable gains then, main thing is the DPF being removed which will cause less headaches in future
Good thing your torque is in check, my pd150 mk1 leon is running a stage 1 revo map with 202bhp/365lbft which is just mental torque wise so may look at getting it mapped at a proper diesel tuner close to me
Good thing your torque is in check, my pd150 mk1 leon is running a stage 1 revo map with 202bhp/365lbft which is just mental torque wise so may look at getting it mapped at a proper diesel tuner close to me
chris285 said:
seems reasonable gains then, main thing is the DPF being removed which will cause less headaches in future
Good thing your torque is in check, my pd150 mk1 leon is running a stage 1 revo map with 202bhp/365lbft which is just mental torque wise so may look at getting it mapped at a proper diesel tuner close to me
Having a DPF is completely pointless, causes more problems, and will cost more to rectify the problem/s. The torque in my Skoda is immense, it will pull in any gear, and just want's to go, doesn't want to stop. 202 BHP is a lot, especially the torque thats more than my remapped Skoda! Good thing your torque is in check, my pd150 mk1 leon is running a stage 1 revo map with 202bhp/365lbft which is just mental torque wise so may look at getting it mapped at a proper diesel tuner close to me
You don't want to stress out the turbo, and burn the clutch off. I only rag the Skoda 2nd and 3rd gear, as it goes mental in 1st gear lol, esp light continously flashes. Shark Performance is my recommendation.
If i get it done it would most likely be darkside as they are not far away and have a very good rep, although not sure if i am gonna keep the car beyond the middle of next year. do about 50miles a week if that and its only done 76k so still worth some money so may chop in for something with quattro and a petrol but not sure yet
liner33 said:
This was my stock* PD VRS 170 Octy, of course "different dynos different days", I understood its the norm for a the PD and CR 170 engines to produce 180-190 anyhow

Your Skoda has slightly more BHP than mines, a panel filter does help then? What tyres have you fitted, and size? - just a K&N panel air filter

Zuhayb said:
Just to say 170 to 190 may sound like mild remap, but my car shoot's off in 1st gear and keeps on wheel spinning to 3rd gear, with esp on! It's the torque that gives you the pulling power. I will be fitting APR induction kit, and better tyres then do another dyno test.
What tyres do you have to be wheel spinning in 3rd gear? (presumably you mean wheel spinning on a dry flat surface?)Zuhayb said:
Your Skoda has slightly more BHP than mines, a panel filter does help then? What tyres have you fitted, and size?
That is a massive leap of faith there. "Your car has more BHP than mine - so the panel filter has made a difference"There are very rarely two exact same engines built - there could be BHP difference between any two engines off the same production line.
Plenty of test evidence out there to indicate a panel filter really wouldn't make any kind of difference on this kind of engine.
Zuhayb said:
Ordinary_Chap said:
What tyres do you have to be wheel spinning in 3rd gear? (presumably you mean wheel spinning on a dry flat surface?)
Very low budget tyres on front, as they were fitted when I purchased the Skoda. They wheel spin on both conditions, dry and wet (obviously).Makes me put a smile on my face, when I see the esp light flashing like crazy. I blame it on those budget Event tyres, I will be fitting Goodyear F1's on all 4 corners.
235/45/17's
I'm gonna take the hit, and go for one of these induction kits, APR CAI, CDA BMC, Pipercross, or 57i typhoon K&N.
DC Performance want CDA BMC £230 inc VAT, APR CAI £235 inc VAT, is there any site/link where I can get one for my Skoda? I assume any VAG tdi induction kit will fit on my Skoda?
235/45/17's
I'm gonna take the hit, and go for one of these induction kits, APR CAI, CDA BMC, Pipercross, or 57i typhoon K&N.
DC Performance want CDA BMC £230 inc VAT, APR CAI £235 inc VAT, is there any site/link where I can get one for my Skoda? I assume any VAG tdi induction kit will fit on my Skoda?
Edited by Zuhayb on Tuesday 26th November 17:35
liner33 said:
Might not make any difference in peak hp but they clearly do make a difference somewhere presumably mid range torque since the car picked up 1-2 extra mpg on average , as did our 170 cr engined Superb , that's over a brand new oem filter
And again....leaps of faith.Seeing an extra 1-2 mpg can be attributed to absolutely anything.
I've got nothing against panel filters. But assuming they are making all these differences which are extremely minor in the first place but could in fact be attributing nothing.....
But if people want to spend their hard earn't - tis up to them I suppose.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


