Locking wheel nuts and keys.
Discussion
For the second time in a year, I've had problems with my locking nuts on the A6.
Last year was the first year I swapped the summer wheels to winter wheels myself, and whoever had put them on previously (Kwikfit) had tightened them up so tight that the key rounded off when trying to remove them.
As I had two wheels on the car already (and no way of getting the summer or winters off) I managed to get a garage to take them out and bought a new key from Audi for £42.
This year, I got three of them off, but on the last one, the nut rounded off.
Having learned from my experience last year, I went round the whole car undoing the locking nuts before swapping wheels so wasn't too bad.
The end result is that I don't think that pattern is particularly good.
However, looking for an aftermarket replacement, they all seem to be the same pattern. Which for one is s
te as it means everyone has the same key, and for two means that I could end up with the same problem again in March.
OR have I got the wrong end of the stick and they're only displaying that pattern, but the one supplied will be random?
For the record, the key/nut pattern is this:

Anyone know where I can get others (aside from Audi) for about the £40 mark?
Last year was the first year I swapped the summer wheels to winter wheels myself, and whoever had put them on previously (Kwikfit) had tightened them up so tight that the key rounded off when trying to remove them.
As I had two wheels on the car already (and no way of getting the summer or winters off) I managed to get a garage to take them out and bought a new key from Audi for £42.
This year, I got three of them off, but on the last one, the nut rounded off.
Having learned from my experience last year, I went round the whole car undoing the locking nuts before swapping wheels so wasn't too bad.
The end result is that I don't think that pattern is particularly good.
However, looking for an aftermarket replacement, they all seem to be the same pattern. Which for one is s
te as it means everyone has the same key, and for two means that I could end up with the same problem again in March.OR have I got the wrong end of the stick and they're only displaying that pattern, but the one supplied will be random?
For the record, the key/nut pattern is this:
Anyone know where I can get others (aside from Audi) for about the £40 mark?
Edited by Kell on Monday 25th November 13:16
I've put copper grease on the ones I've done, but too little too late.
The McGard ones were the ones I was looking at, but they all appear to have the same pattern - which is the same as the ones I've already got.
I was just hoping that it would vary. Knowing my luck, I'd still get teh same one if I ordered online.
The McGard ones were the ones I was looking at, but they all appear to have the same pattern - which is the same as the ones I've already got.
I was just hoping that it would vary. Knowing my luck, I'd still get teh same one if I ordered online.
Just come off the phone to someone at McGard.
Turns out that all their nuts look like the same pattern, but have slight differences so that one key won't fit another set. Plus they're hardened so you shouldn't have the problem of nuts or key rounding off.
Going to give them a go and hope for the best.
Turns out that all their nuts look like the same pattern, but have slight differences so that one key won't fit another set. Plus they're hardened so you shouldn't have the problem of nuts or key rounding off.
Going to give them a go and hope for the best.
Rich_W said:
There are variations in the shape of the "squiggle" and there's circa 25-30 variants.
Also bear in mind the torque setting is only 120NM for the bolts so you don't need to go any tighter. Are you using a torque wrench? Halfords will sell you a quality one for £50-80ish
As I say, I didn't tighen them. As far as I recall, Kwik Fit used an air gun on all nuts.Also bear in mind the torque setting is only 120NM for the bolts so you don't need to go any tighter. Are you using a torque wrench? Halfords will sell you a quality one for £50-80ish
The problem I had both times was undoing them, not tightening them. And in both cases, it was trying to undo one that someone else had tightened.
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


