TDS. Sump Gasket Part Number, Chassis cross section?

[StreetDragster]

Hi all,

Need to fit a Trackday sump over winter, probably going to do the cut chassis method and make the bar removable.

Does anyone have the part number for the sump gasket and oil filter, and any other parts i'll need?

Also, anyone know the cross sectional sizes of the chassis where it needs to be cut? Want to get some plastic blanks so i can bond them in to keep water out

Thanks

Matt

[mgbond]

There are a couple of gasket types. O ring type and a flat gasket with a raised O ring.

Speak to Jetstrem. I might of even put the O ring type on wiki or noble parts

[StreetDragster]

Thanks, will do.

Any particular benefit of using one over the other?

I presume no liquid sealant is used

[mgbond]

StreetDragster said:

Thanks, will do.

Any particular benefit of using one over the other?

I presume no liquid sealant is used

Yes, one won't fit and the other will. Lol

[Craighb]

If you have the trackday sump with the channel machined into the mating surface then the Ford part number for the gasket is 4802294.....you'll have to pick yourself up off the floor when they tell you what it costs!!

[StreetDragster]

Wow, you are not wrong!

http://www.allcarpartsfast.co.uk/ford/ford-4802294...

Matt

[Craighb]

Yep....I expected it to be flexible gold rolled personally on a virgins thigh......but it wasn't......Buger