CV joint noises.
Discussion
Hi, my NSF CV joint has recently started making the distinct clicking noise on full lock and looks like needing to be replaced.
My question is, does that noise indicate specifically that the OUTER CV joint if failing or can that noise come from the inner joint too?
Also, putting aside the obvious, how long can I go before replacing it? It's a bit too late to do it this weekend and I'm occupied next weekend. Without major abuse will it go on for a while or might it collapse on me at any moment?
Thanks for any help.
My question is, does that noise indicate specifically that the OUTER CV joint if failing or can that noise come from the inner joint too?
Also, putting aside the obvious, how long can I go before replacing it? It's a bit too late to do it this weekend and I'm occupied next weekend. Without major abuse will it go on for a while or might it collapse on me at any moment?
Thanks for any help.
Hi,
In most cases of failed CV joints I have seen, it is the outer joint that makes nasty noises due to it being the joint that's taking the stress of steering motion when under lock. The inner joints just "spin" accordingly and often aren't at fault. However don't rule it out.
As far as how long till the big failure...who knows. Depends if it's been subject to the ingress of dirt etc, and if so how long.
Get it looked at. It will need doing at some point!
In most cases of failed CV joints I have seen, it is the outer joint that makes nasty noises due to it being the joint that's taking the stress of steering motion when under lock. The inner joints just "spin" accordingly and often aren't at fault. However don't rule it out.
As far as how long till the big failure...who knows. Depends if it's been subject to the ingress of dirt etc, and if so how long.
Get it looked at. It will need doing at some point!
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


