Tvr Ecu Diagnostics

[stlol]

I'm using the diag software on windows 7, is there a setting to alter or workaround to stop it logging you out of windows when you close the program??

[Andy_mr2sc]

Just had a search back through the PH forums and found this:

http://www.pistonheads.com/gassing/topic.asp?h=0&a...
About half way down. I'm sure there is another way to do it where you press a key while closing it but cannot find it at the moment.

[stlol]

Thanks Andy,
It works by ending the process in task manager.

[stlol]

Following your suggestion and after messing with a few keys during closing, it closes normally without logging you off if you press Ctrl whilst closing.
Thanks again.

[paul1962]

GrahamV has a version of the software on his site which I patched so it doesn't log you out when you quit, you don't have to remember to press ctrl etc.
There's also something else slightly different about it but I can't remember what.

[VARLEYHYD]

paul1962 said:

GrahamV has a version of the software on his site which I patched so it doesn't log you out when you quit, you don't have to remember to press ctrl etc.
There's also something else slightly different about it but I can't remember what.

Yes works fine thanks!

The other thing you did was re-size the windows for easy navigation too ... Just brilliant stuff

[paul1962]

VARLEYHYD said:

The other thing you did was re-size the windows for easy navigation too

Ah yes, I remember now.

Also, didn't it gain an extra display for oil pressure as that was missing from the original ?

All done a long time ago and my memory is rubbish !

[VARLEYHYD]

paul1962 said:

Also, didn't it gain an extra display for oil pressure as that was missing from the original ?

All done a long time ago and my memory is rubbish !

[stlol]

Missed these replies but thanks both, I have now downloaded the patched version.

[EvoOlli]

A solution for the different problems with the old software is on it's way....watch this space ;-)

[BuzzBillsberry]

Has anyone got a link to GV 's site for the software

Thanks

Buzz

[tvrjay]

BuzzBillsberry said:

Has anyone got a link to GV 's site for the software

Thanks

Buzz

Hi Buzz, This is the link http://www.varleyhyd.com/FJ062.asp
but the site seems to be down at the moment as I can't view it.

[stlol]

Buzz, Evoolli has posted a topic for a version he has written which is available for download.

[BuzzBillsberry]

tvrjay said:

Hi Buzz, This is the link http://www.varleyhyd.com/FJ062.asp
but the site seems to be down at the moment as I can't view it.

Cheers for that I was having issues getting on to GV's site glad it's not just me

Thanks Steve I'll drop Oilli a mail

Buzz

[BuzzBillsberry]

tvrjay said:

Hi Buzz, This is the link http://www.varleyhyd.com/FJ062.asp
but the site seems to be down at the moment as I can't view it.

Cheers for that I was having issues getting on to GV's site glad it's not just me

Thanks Steve I'll drop Oilli a mail

Buzz

[stlol]

https://www.dropbox.com/s/nwrpsgfji0b3p7f/mbetool....

[BuzzBillsberry]

stlol said:

https://www.dropbox.com/s/nwrpsgfji0b3p7f/mbetool....

Once again thanks Steve

Buzz

[EvoOlli]

...better take a look at the original thread:

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

I don't know if the download link will be the same with future version...