58 reg Jetta TDi ECU update = new GEARBOX??
Discussion
Here's a good one. My parents have a 58 reg Jetta 2.0 TDi 140. Went in a few weeks ago to a main dealer for a service and to investigate a strange fault where it sounded like the engine was over-running a little when switching off.
Got the car back with the usual 'no diag light - no fault' answer.
A couple of weeks later I borrow the car and notice the cruise control inoperable in some gears. A few other weird faults also came up - all windows opening by themselves, auto dimming mirror not working and wingmirror adjuster intermittent.
Went back in this week to have investigation work. They've fitted a new throttle body (electronic) and an ignition switch to try sorting the over-run issue. They had to contact VW technical with regards to the cruise control.
When the car went in last, they updated the ECU with the latest version of software. Apparently this car is of a particular batch where if the ECU is updated, the cruise control becomes inoperable due to unexpected load and throttle conditions. Apparently the ratios in the gearbox are different to what the ECU expects, causing the wrong load conditions.
The fix? Not roll back the software. Not to alter the software to suit the car. Fix it by changing the gearbox to suit the software.
Nothing at all wrong with the gearbox.
Any experts out there know how to correct the bungled software update? Surely there's a way of re-flashing the ECU?
Got the car back with the usual 'no diag light - no fault' answer.
A couple of weeks later I borrow the car and notice the cruise control inoperable in some gears. A few other weird faults also came up - all windows opening by themselves, auto dimming mirror not working and wingmirror adjuster intermittent.
Went back in this week to have investigation work. They've fitted a new throttle body (electronic) and an ignition switch to try sorting the over-run issue. They had to contact VW technical with regards to the cruise control.
When the car went in last, they updated the ECU with the latest version of software. Apparently this car is of a particular batch where if the ECU is updated, the cruise control becomes inoperable due to unexpected load and throttle conditions. Apparently the ratios in the gearbox are different to what the ECU expects, causing the wrong load conditions.
The fix? Not roll back the software. Not to alter the software to suit the car. Fix it by changing the gearbox to suit the software.

Nothing at all wrong with the gearbox.
Any experts out there know how to correct the bungled software update? Surely there's a way of re-flashing the ECU?
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


