Made a few bits .
Discussion
While the Noble is away at Jetstream I have been working with Neil from the Signteam on some lightweight bits .
New 3 piece window set too save over 1kg of weight high up .
Nice dark tint .

I'm taking off the aircon for this season as you can remove 20kg of weight , normally you have too cut up the std bracket but thanks to Jetstream lending me a std bracket I got some posh billet alloy units made , saved 220 grams .

Finally I have always disliked the alloy infill panels on the rear arches , made some in flat carbon , hopefully they will look better than std and very stiff compared too the alloy .

Hopefully everything will be ready for Autosport .
Tux
New 3 piece window set too save over 1kg of weight high up .
Nice dark tint .

I'm taking off the aircon for this season as you can remove 20kg of weight , normally you have too cut up the std bracket but thanks to Jetstream lending me a std bracket I got some posh billet alloy units made , saved 220 grams .

Finally I have always disliked the alloy infill panels on the rear arches , made some in flat carbon , hopefully they will look better than std and very stiff compared too the alloy .

Hopefully everything will be ready for Autosport .
Tux
I can understand all the carbon bits as they look nicer (eye of the beholder and all that), but why on earth are you ditching the air-con? Sure, you save 20kg but your car has more power than you can shake a stick at and you're not racing competitively (or are you??) Although the air-con ain't exactly brilliant, it makes the trips to Spa and the Ring just about bearable during the summer months. In fact this summer it was so hot at the Ring (track temp >50C) that I had to have the air-con running whilst on track!
Gassing Station | Noble | Top of Page | What's New | My Stuff




Talk to Jetstream!
i deff want a set.

