Hit and run - dentmaster job?
Discussion
There was a thread on here a while ago where someone had left a Porsche 911 in a car park overnight and when he went to get it the next morning, some scrotes had jumped on the roof - it looked like new roof time: the owner found a dent man who had it looking as good as new with a few hours work. Might be worth having a hunt for the thread, as I'm sure it had the dent guys details...
The biggest problem you'll have isn't the big dent on the main part of the panel, but the small crease right next to the swage line, as this always makes a perfect repair difficult.
The biggest problem you'll have isn't the big dent on the main part of the panel, but the small crease right next to the swage line, as this always makes a perfect repair difficult.
I know a lot of people take the pi.. out of this site
BUT have a look at this guys work , and look at all the pages
http://www.detailingworld.co.uk/forum/showthread.p...
BUT have a look at this guys work , and look at all the pages
http://www.detailingworld.co.uk/forum/showthread.p...
Most colours have (at least) a couple of alternatives (a slight difference in shade). This is because different batches of the same colour are made to spray the thousands of cars produced in that colour and sometimes the mixes of paint aren't exactly the same - hence alternative shades.
A sprayshop (should) do test cards before spraying to ensure they're using the correct alternative - and even then blending into the adjoining panels may be required.
So even if you manage to source a replacement door of the same colour you won't know 100% that the colour match is perfect until its been fitted - and the chances are high that it won't match perfectly!
So if you get a replacement door you'll have the cost of a replacement door @£??? and then there's a very strong chance that you'll still need it painted and blended at £200- £300
Personally I'd go to a couple of reputable independent bodyshops and see what they say they can do.
They'll know a guy that can do dents, then it may need a small skim of filler here and there and then it'll need painting and blending
I'd imagine a total cost £275-£375 for an invisible repair.
(People may say the prices I've suggested are high - but I believe you get what you pay for
)
A sprayshop (should) do test cards before spraying to ensure they're using the correct alternative - and even then blending into the adjoining panels may be required.
So even if you manage to source a replacement door of the same colour you won't know 100% that the colour match is perfect until its been fitted - and the chances are high that it won't match perfectly!
So if you get a replacement door you'll have the cost of a replacement door @£??? and then there's a very strong chance that you'll still need it painted and blended at £200- £300
Personally I'd go to a couple of reputable independent bodyshops and see what they say they can do.
They'll know a guy that can do dents, then it may need a small skim of filler here and there and then it'll need painting and blending
I'd imagine a total cost £275-£375 for an invisible repair.
(People may say the prices I've suggested are high - but I believe you get what you pay for
)Gassing Station | General Gassing | Top of Page | What's New | My Stuff



