Front bulkhead

[Alex93]

The hole for the steering rack in the front bulkhead: the manual keeps emphasising that the sketch is for a LHD car but that image shows it from the front and looks correct for a RHD car? Any help please?
Alex

[Steve_D]

Alex93 said:

The hole for the steering rack in the front bulkhead: the manual keeps emphasising that the sketch is for a LHD car but that image shows it from the front and looks correct for a RHD car? Any help please?
Alex

The photos included in the steering section are of a LHD car.

The sketch in the chassis skinning section shows dimensions for a RHD chassis but warns....
'NOTE. HAND DIMENSIONS FOR LEFT HAND DRIVE' Meaning you need to reverse the dimensions for LHD.

Steve

[Alex93]

Sorry this is me being slack. So I'm to follow the sketch that the link in the manual takes you to as I'm building a RHD car?
Alex

[Steve_D]

Alex93 said:

Sorry this is me being slack. So I'm to follow the sketch that the link in the manual takes you to as I'm building a RHD car?
Alex

Yep.

Steve

[Alex93]

Thank you, I thought that's what It must be otherwise on a RHD car the hole would be way out to the passenger side of the car if I were to swap the measurements around. Thanks a lot
Alex

[Alex93]

Edited by Alex93 on Monday 23 December 14:42