Speed six clutch issue
Discussion
Afternoon all,
This actually relates to my Tuscan but i figured the S6 Cerb may be a similar configuration...
I have just fitted a new clutch master cylinder (was damp around the end) and RP slave cylinder. With the box being out i also removed the clutch to inspect - it seemed servicable though the starlock washers on the three dowels were fractured. I fitted new starlock washers then refitted and bled the clutch however i could not get the clutch to release properly, the outer friction plate (gearbox side) released ok but the inner friction plate (flywheel side) hardly releases at all. I have removed the clutch again and refitted the old starlock washers but it has made little difference; i have bled the system several times and it seems air free.
This should have been be fairly straight forward but is now driving me mad!! Anyone ever had a similar issue?
Cheers
Richard
This actually relates to my Tuscan but i figured the S6 Cerb may be a similar configuration...
I have just fitted a new clutch master cylinder (was damp around the end) and RP slave cylinder. With the box being out i also removed the clutch to inspect - it seemed servicable though the starlock washers on the three dowels were fractured. I fitted new starlock washers then refitted and bled the clutch however i could not get the clutch to release properly, the outer friction plate (gearbox side) released ok but the inner friction plate (flywheel side) hardly releases at all. I have removed the clutch again and refitted the old starlock washers but it has made little difference; i have bled the system several times and it seems air free.
This should have been be fairly straight forward but is now driving me mad!! Anyone ever had a similar issue?
Cheers
Richard
Gassing Station | Cerbera | Top of Page | What's New | My Stuff