Polo 6n2 rear heated screen
Discussion
So in my polo (1.6 if it helps), the rear heated screen does not work....
have got myself a haynes manuel, and it does not say anything about the rear heated screen. I'm guessing its a wiring problem as there were a few different wiring problems with this car before i got it but the ones i knew about got sorted.
but didn't know about the rear heated screen until the other day when i went to use it and it didn't work.
might even be a fuse problem, but i don't know what fuse it is in the 'box' to check it out.
does anyone know what fuse i would have to check, or what part to check out to look at fixing? I'm thinking it might be either the fuse or the wires in the rubber tube thingy that goes from the car to the boot.
so whats your guess?
have got myself a haynes manuel, and it does not say anything about the rear heated screen. I'm guessing its a wiring problem as there were a few different wiring problems with this car before i got it but the ones i knew about got sorted.
but didn't know about the rear heated screen until the other day when i went to use it and it didn't work.
might even be a fuse problem, but i don't know what fuse it is in the 'box' to check it out.
does anyone know what fuse i would have to check, or what part to check out to look at fixing? I'm thinking it might be either the fuse or the wires in the rubber tube thingy that goes from the car to the boot.
so whats your guess?
on my sister's 6N the wire for it running into the boot had rubbed bare and kept blowing fuses. It was linked to something random like the drivers window fuse so if you have leccy windows this wont work either. Find the wire (somewhere where it comes into the boot would be my guess as the culprit) tape it up, fit a new fuse.
ah ok, well the electric windows still work fine.
so now I'm guessing its not a fuse, and its the wire, as before i bought the car, the mirror and window on the drivers side wire's have to be soldered and taped back together as they had snapped/worn through.
right, looks like I'm going to be getting handy with the soldering iron and tape tomorrow
cheers.
so now I'm guessing its not a fuse, and its the wire, as before i bought the car, the mirror and window on the drivers side wire's have to be soldered and taped back together as they had snapped/worn through.
right, looks like I'm going to be getting handy with the soldering iron and tape tomorrow
cheers.
Question is where is the fault. Is it lack of power to the rear screen or screen elements dead. In the absence of a meter,make a test lamp from any 12v bulb and connect across the ( removed ) rear screen terminal wiring. Lamp lights- wiring OK, and you need to look at the element. Lamp not light, then problems in wiring/fuse. On a Haynes Fabia fusebox it's fuse 39, extreme right and sixth from top,a 20A fuse . Possibly both models share a wiring loom and fusebox layout. If not, then perhaps a trip to the ever helpful blokes on Briskoda.net might help .
Gassing Station | Audi, Seat, Skoda & VW | Top of Page | What's New | My Stuff


