Diff gears
Author
Discussion

Drew SS

Original Poster:

2,683 posts

215 months

Wednesday 8th January 2014
quotequote all
Hi guys haven't posted for awhile I'm in the proces of rebuilding the rear end of the ute new bushes sub Frame powder coated,under sealed the works toying with the idea of rebuilding my diff as I can only buy another 3.45 the centre I have now is whining bad...so I think a 3.7 or 3.9 ideally so been looking at the motive gear sets has anyone had any dealings with the brand as I no some gear sets are wihiney if someone could shed some light on the subject would be good

Andy

Edited by Drew SS on Wednesday 8th January 20:48

gsd2000

11,515 posts

214 months

Wednesday 8th January 2014
quotequote all
have a look on ls1gto but im fairly certain that there were alot of reports of Motive gears whinning

jameshsv

5,844 posts

191 months

Wednesday 8th January 2014
quotequote all
MF have a couple of SH complete diffs for sale

ringram

14,702 posts

279 months

Wednesday 8th January 2014
quotequote all
IIRC there are 2 types of motive gears. I think some are coated?
Anyway I have some in the camaro and compared to the OEM ones which were screaming they are nice and quiet.
No issues as yet. Done about 10,000 miles so far on them in the camaro. Same size near enough as the monaro I think 7.5" IIRC.
3.42:1

Drew SS

Original Poster:

2,683 posts

215 months

Wednesday 8th January 2014
quotequote all
jameshsv said:
MF have a couple of SH complete diffs for sale
They do but aT 595 plus vat I can rebuild what I have cheaper than that

ARAF

20,759 posts

254 months

Wednesday 8th January 2014
quotequote all
Did Sheepdip remove his from his old CV8 (and putting the standard one back in) before selling it, in the summer?

Maybe worth a PM to see. smile

MyM8V8

9,468 posts

226 months

Thursday 9th January 2014
quotequote all
Drew SS said:
Hi guys haven't posted for awhile I'm in the proces of rebuilding the rear end of the ute new bushes sub Frame powder coated,under sealed the works toying with the idea of rebuilding my diff as I can only buy another 3.45 the centre I have now is whining bad...so I think a 3.7 or 3.9 ideally so been looking at the motive gear sets has anyone had any dealings with the brand as I no some gear sets are wihiney if someone could shed some light on the subject would be good

Andy

Edited by Drew SS on Wednesday 8th January 20:48
GSD200 has a GM spring kit for tightening up the stock LSD.

Price up the bearings! Unless you are getting them from Oz, they may shock you. I'm off to Taz next week Mate!

I think the Fish had some bad experiences with the Motive 3.91's whining badly, but not used them myself. Whether the 3.73's are better, I don't know, but I do know that fitting them ( 3.73 ratio that is) will make a noticeable difference.

Don't you have a Tru Trac yet?

MyM8V8

9,468 posts

226 months

Thursday 9th January 2014
quotequote all
BTW Andy, what did you pay for the rear wheel bearings. Priced them up at the Fish for £67 each inc vat!!!