Tamora roof removal

[UFO MATT]

I would like to have a new plastic rear screen put in as the common clouding is getting worst. The trimming company is considerably cheaper if you remove the rear section yourself. Has anyone done this themselves and is it an easy job? I assume there is a number of bolts around the edge holding it down. I have used the Renovo screen cleaner for years and it's a great product but it needs a new one.
Many thanks

[shep1001]

Rep, there are a few bolts to undo. Some are under the flap of fabric that runs round the window, the two outermost bolts can be reached with the targa down

Shep

[BuzzBillsberry]

As Andy suggested it an easy job I had mine of last year for stitching . Lift the fabric which I velcro, and undo the 10-12 bolts that secure the rear frame to the car I think thy were 8mm the finally the two Allan headed bolts that secure the pivot rose joint of the hood to the side of the car and lift away not for getting to disconnect the power supply lead...mine was on the drivers side.

Replacing it will be fitting the 2 Allan head bolts first

Buzz

[UFO MATT]

Cheers guys