Discussion
Hi Mate...They look like a pair of my shoes....What size are they?....
Where did you get them...They look the bollax...I want......
...I bought some from howlfrauds earlier but they just don't cut it.... 
..Mind you they are better than the ones i had as they started falling apart....Cheers...Ziga
Where did you get them...They look the bollax...I want......
...I bought some from howlfrauds earlier but they just don't cut it.... ..Mind you they are better than the ones i had as they started falling apart....Cheers...Zigamrzigazaga said:
Hi Mate...They look like a pair of my shoes....What size are they?....
Where did you get them...They look the bollax...I want.........I bought some from howlfrauds earlier but they just don't cut it.... ..Mind you they are better than the ones i had as they started falling apart....Cheers...Ziga
Hi mateWhere did you get them...They look the bollax...I want......
...I bought some from howlfrauds earlier but they just don't cut it.... ..Mind you they are better than the ones i had as they started falling apart....Cheers...ZigaHa ha.... Hmmm you may need insoles, I recon they might be a bit big!
They are on eBay the seller is Patternone_autostyle if ya search TVR 350i mats they should come up, can't seem to copy a link on my phone for some reason.
They are really helpful, they sent me out samples of carpet and trim, also different quality of carpet, these are the standard.
And I think they are great. The TVR Badge is something I've added myself, it's actually for the outside of the car, for when it eventually get it painted.. But I'll just get another.
Rik
...Im going for gold badges but they are not cheap so I'm having an old set that i have re-nickled and then gold chromed, Its actually a lot cheaper...I might even take a leaf out your book as far as the interior goes...Instead of a full re-trim.....Zigamrzigazaga said:
;)...Im going for gold badges but they are not cheap so I'm having an old set that i have re-nickled and then gold chromed, Its actually a lot cheaper...I might even take a leaf out your book as far as the interior goes...Instead of a full re-trim.....Ziga
Well I got that gold badge again off eBay for £10.00 It's self adhesive but metal.
It's really nice, slightly smaller than the existing one, but still looks right.
Well if you can get your carpets out as templates, you can make a half decent job of cutting from a roll.
Also the dress maker that has stitched the gaters and door cards said she can pipe carpet, providing it's not too thick, so thinking of getting the back shelf section piped.
It's never gonna be as good as factory but it's still nice and a great sense of achievement. As you will know of coarse the work you put into Delilah!
TVRIK said:
It's never gonna be as good as factory but it's still nice and a great sense of achievement. As you will know of coarse the work you put into Delilah!
Your right there mate...Its a good feeling when you D.I.Y...And it looks good.I have made a start on Poppy, I have some rocker covers to go on and I'm going to detail the plenum..Although I'm unsure about the rocker covers colour...Powder coated black with detailed fins...Or primed and painted with the military paint that i have as its a good VHT paint and doesn't burn even on exhausts like the stuff you get elsewhere..I have painted the flame trap with it but still not 100% on the colour...I did want chrome with red detailing but its bloody expensive and its money better spent on refurbing the wheels or replacing the A frame bushes which need doing...I think I'm lucky as the engine in mine seems to be regular as clock work and pulls like a train...Ziga
The black look nice..Were they powder coated or hand painted?...I have added some new serviceable items but made it a bit more colourful, Whenever i get a vehicle i always change plugs..Leads...Dizzy cap..Rotor arm...Coil...Air and oil filters just as a precautionary..i have cleaned both the intake breather on the N/S valve cover and the flame trap..They were both caked and it has made quite a bit of difference..By the way this was my engine when i got it...Cheers...Ziga
TVRIK said:
Hi mate
Ha ha.... Hmmm you may need insoles, I recon they might be a bit big!
They are on eBay the seller is Patternone_autostyle if ya search TVR 350i mats they should come up, can't seem to copy a link on my phone for some reason.
They are really helpful, they sent me out samples of carpet and trim, also different quality of carpet, these are the standard.
And I think they are great. The TVR Badge is something I've added myself, it's actually for the outside of the car, for when it eventually get it painted.. But I'll just get another.
Rik
How did you do the badge?Ha ha.... Hmmm you may need insoles, I recon they might be a bit big!
They are on eBay the seller is Patternone_autostyle if ya search TVR 350i mats they should come up, can't seem to copy a link on my phone for some reason.
They are really helpful, they sent me out samples of carpet and trim, also different quality of carpet, these are the standard.
And I think they are great. The TVR Badge is something I've added myself, it's actually for the outside of the car, for when it eventually get it painted.. But I'll just get another.
Rik
They look great and I'm looking for some for mine. Do you fit them to the floor directly or are they just over mats to go on top of the carpet.
A.
Hi Toby
The badge is actually a metal exterior badge, without the pins on the back, so it's simply glued on.
I'm toying either idea of cutting the carpet down to the rubber backing and laying it in, but that might get messy.
They come with some universal clips that hook into your carpets then you can fasten them down.
Hope this helps mate.
Rik
The badge is actually a metal exterior badge, without the pins on the back, so it's simply glued on.
I'm toying either idea of cutting the carpet down to the rubber backing and laying it in, but that might get messy.
They come with some universal clips that hook into your carpets then you can fasten them down.
Hope this helps mate.
Rik
Hi Rik
You said they are from autostyle or their agents.
If so they could have stiched in to the mat the TVR logo and anything else you want like the model of the car etc.
I had a couple of sets done for use in some of my cars for shows.
They simply sit it the boot and get put into the car when you arrive. That way the carpets look like new with no marks, dirt etc. Off course that means you need another set for normal use, so not everybody's choice of doing things.
Andy
You said they are from autostyle or their agents.
If so they could have stiched in to the mat the TVR logo and anything else you want like the model of the car etc.
I had a couple of sets done for use in some of my cars for shows.
They simply sit it the boot and get put into the car when you arrive. That way the carpets look like new with no marks, dirt etc. Off course that means you need another set for normal use, so not everybody's choice of doing things.
Andy
TVRIK said:
Hi Toby
The badge is actually a metal exterior badge, without the pins on the back, so it's simply glued on.
I'm toying either idea of cutting the carpet down to the rubber backing and laying it in, but that might get messy.
They come with some universal clips that hook into your carpets then you can fasten them down.
Hope this helps mate.
Rik
It does, thanks.The badge is actually a metal exterior badge, without the pins on the back, so it's simply glued on.
I'm toying either idea of cutting the carpet down to the rubber backing and laying it in, but that might get messy.
They come with some universal clips that hook into your carpets then you can fasten them down.
Hope this helps mate.
Rik
I assume the supplier cut it from their own template? Is the fit good or haven't you got around to checking that yet?
A.
A.
Mr Tank said:
Hi Rik
You said they are from autostyle or their agents.
If so they could have stiched in to the mat the TVR logo and anything else you want like the model of the car etc.
I had a couple of sets done for use in some of my cars for shows.
They simply sit it the boot and get put into the car when you arrive. That way the carpets look like new with no marks, dirt etc. Off course that means you need another set for normal use, so not everybody's choice of doing things.
Andy
Yeah that's right Andy, but I wanted to use the metal badge, makes em look really classy IMHOYou said they are from autostyle or their agents.
If so they could have stiched in to the mat the TVR logo and anything else you want like the model of the car etc.
I had a couple of sets done for use in some of my cars for shows.
They simply sit it the boot and get put into the car when you arrive. That way the carpets look like new with no marks, dirt etc. Off course that means you need another set for normal use, so not everybody's choice of doing things.
Andy
Good idea Andy, they aren't that expensive so may get another set.
Toby Tram said:
It does, thanks.
I assume the supplier cut it from their own template? Is the fit good or haven't you got around to checking that yet?
A.
A.
Yeah they did Toby,I'm fitting my door cards today and finishing off with mats, I'm assuming they will fit ok.I assume the supplier cut it from their own template? Is the fit good or haven't you got around to checking that yet?
A.
A.
You can ask them for samples of trim and carpet, free,
They have different grades of carpet,I've opted for premier which is the standard and I think they are great.
I needed samples to see how the colours matched and it's close enough.
Do you have the details?
Gassing Station | Wedges | Top of Page | What's New | My Stuff