Big Power fuel system
Big Power fuel system
Author
Discussion

gsd2000

Original Poster:

11,515 posts

214 months

Friday 10th January 2014
quotequote all
I was just wondering what sort of fuel system are the high powered guys running?

Harry, jez, Wormus and Gareth?

Im piecing together a fuel system but as i was to experiment with alternative fuels i need to flow approx 40% more, so the system needs to be capable of 1000+hp

At the moment in my head my spec is

stock bucket and pump
5 litre surge tank
twin 044 pumps or holley 12-1800 pump
-8 feed to rail
ID1000 injectors
external fuel pressure regulator
stock feed line as return (-6) back to surge tank
overflow from surge to stock bucket

I just wasnt sure if there was a drop in system that would easily flow plenty of fuel and not run dry if i have less than a 1/4 of tank

I know i could drill a bucket and run twin walbro 255's but then my understanding is that due to the holes the bucket can't remain fuel below a 1/4 of a tank of fuel and the pumps start to over heat and the fuel pressure starts to drop off

As i have a 2004 monaro im not sure if i can fit a bigger than stock bucket into the tank as the tank sits under the car

thank you

neiljohnson

11,298 posts

238 months

Friday 10th January 2014
quotequote all
Jez has a twin pump in tank set up iirc

044's will flow enough but they are extremely noisey doing it!! I'm not sure on their compatibility with other fuels

Some people I know have been using detchworks pumps with very good results & they do a drop in pump for the commodore & gto so should be easy to fit

Also look at the aero motive drop in pump afaik no other drop in pump will flow more & is rated to over 700bhp at 60 psi fuel pressure


Keeping the fuel level over 1/4 of a tank when giving it 'the beans' is good practice regardless of your fuel system wink

Behold81

2,931 posts

200 months

Friday 10th January 2014
quotequote all
Speaking to Roger on this G and there is room to fit 2 Stock 05 pumps in the tank. you then run a STOCK fuel line to the front (Apparently all the clamps are there for it) and then run a feed to each rail with a balancer pipe.

Should give more than enough.

Regulators ETC need fitting still but all sits like stock. No noisy tank in the rear.

Still need to look in to it a bit more. might see if I can get an 04 spare tank to play with.

Harryoz

1,016 posts

256 months

Friday 10th January 2014
quotequote all
twin 044s from a, I recall, 6L pot. Works, but noisy, and I think the later twin in tank setup is the better option.

raving

1,183 posts

221 months

Friday 10th January 2014
quotequote all
On my ute , standard pump into swirl pot , 2 x 044"s , hobbs switch , original fuel feed pipe as return and new bigger fuel pipe feed easily fuelled 700 +.

gsd2000

Original Poster:

11,515 posts

214 months

Friday 10th January 2014
quotequote all
raving said:
On my ute , standard pump into swirl pot , 2 x 044"s , hobbs switch , original fuel feed pipe as return and new bigger fuel pipe feed easily fuelled 700 +.
Thats exactly what im thinking.

MadMaxHSV

1,816 posts

229 months

Friday 10th January 2014
quotequote all
Wanting to run e85 is your biggest issue due to the extra flow requirements. When choosing components also make sure everything's rated for the stuff.

stevieturbo

18,110 posts

278 months

Friday 10th January 2014
quotequote all
2 x 044's will not do 1000+ on E85, nor will the holley ( well they might do USHP )

2 x 450lph Walbro's might just get you there as long as you keep fuel pressure below 70psi. Obviously these are in-tank only.

I cant see 1000cc injectors doing 1000+ on E85 either.

And despite the overly large swirl tank, I would be using something more capable to feed the swirl tank.

As once engine power exceeds flow ability of this pump, your swirl tank will be emptying.

E85 in general requires bigger everything, and a -10 feed from pumps to rails would be better, and a -8 return.

Plus you'll need good filtration etc with E85.

In general, E85 seems to be a major pain in the hole, and given it isnt readily available at the pump in the UK.....is it worth the hassle ?

anonymous-user

85 months

Friday 10th January 2014
quotequote all
I have twin fuel pumps in the tank modified from the original system but know little more than that. Roger is the man to ask. I think Gareth's has a custom fuel tank in his GTS.

SystemParanoia

14,343 posts

229 months

Friday 10th January 2014
quotequote all
Could you not run multiple LPG injectors per cylinder.

not need for fuel pumps or surge tanks or even tank baffles smile

if you're going F.I, you could even run the LPG lines through the charge cooler tanks to cool them and ensure you always have negative charge temps biggrin


...feel free to totally ignore me though smile

Behold81

2,931 posts

200 months

Friday 10th January 2014
quotequote all
wormus said:
I have twin fuel pumps in the tank modified from the original system but know little more than that. Roger is the man to ask. I think Gareth's has a custom fuel tank in his GTS.
He is who I keep talking to about it. Seems doable. The work is mostly labour. A second tank to work on will help.

stick100

7,017 posts

199 months

Friday 10th January 2014
quotequote all
If you where to run a flow and return system and regulate so you've got a constant 3 bar in the rails would the standard ecu st its self because of changing it from flow only and purge too flow and return ?

stevieturbo

18,110 posts

278 months

Friday 10th January 2014
quotequote all
stick100 said:
If you where to run a flow and return system and regulate so you've got a constant 3 bar in the rails would the standard ecu st its self because of changing it from flow only and purge too flow and return ?
You could rescale one of the tables to accommodate the new pressure across the injector.
Just a tuning issue, nothing major

I think most of the yanks still retain a 55-60psi base pressure even with a flow/return


Ecu doesnt care/know how much fuel is flowing in the system

MyM8V8

9,468 posts

226 months

Friday 10th January 2014
quotequote all
wormus said:
I have twin fuel pumps in the tank modified from the original system but know little more than that. Roger is the man to ask. I think Gareth's has a custom fuel tank in his GTS.
The custom tank is not a good implementation and poor sealing of the stock swirl pot to it means you smell petrol in the cabin. I've been meaning to get it fixed for a long time now. Twin pumps on all the time are bloody noisy (but not as noisy as the engine smile)

stick100

7,017 posts

199 months

Friday 10th January 2014
quotequote all
stevieturbo said:
You could rescale one of the tables to accommodate the new pressure across the injector.
Just a tuning issue, nothing major

I think most of the yanks still retain a 55-60psi base pressure even with a flow/return


Ecu doesnt care/know how much fuel is flowing in the system
Thanks Stevie sir