Discussion
OK how can something so simple be a pain...
Any ideas on how to remove the rear most spark plug on the passenger side of a monaro?
I have a few spark plug sockets and t handle type, but all seem to catch on the exhaust header and I cant fit a ratchet or extension bar on.
Is it possible to fit a ring spanner of some type by going under the manifold? ( I don't have any!!!)
I have already snapped a plug off on the drivers side!!! which made it easier to remove funnily enough.
regards John
Any ideas on how to remove the rear most spark plug on the passenger side of a monaro?
I have a few spark plug sockets and t handle type, but all seem to catch on the exhaust header and I cant fit a ratchet or extension bar on.
Is it possible to fit a ring spanner of some type by going under the manifold? ( I don't have any!!!)
I have already snapped a plug off on the drivers side!!! which made it easier to remove funnily enough.
regards John
mfp4073 said:
OK how can something so simple be a pain...
Any ideas on how to remove the rear most spark plug on the passenger side of a monaro?
I have a few spark plug sockets and t handle type, but all seem to catch on the exhaust header and I cant fit a ratchet or extension bar on.
Is it possible to fit a ring spanner of some type by going under the manifold? ( I don't have any!!!)
I have already snapped a plug off on the drivers side!!! which made it easier to remove funnily enough.
regards John
When i did mine, the passenger side was easy. All i used was a spark plug socket, medium size extension and a ratchet. The drivers side was harder because of the abs pump and all the brake lines, just had to use a wobbly extension to give me a little more room.Any ideas on how to remove the rear most spark plug on the passenger side of a monaro?
I have a few spark plug sockets and t handle type, but all seem to catch on the exhaust header and I cant fit a ratchet or extension bar on.
Is it possible to fit a ring spanner of some type by going under the manifold? ( I don't have any!!!)
I have already snapped a plug off on the drivers side!!! which made it easier to remove funnily enough.
regards John
james
Remove the engine cover if you haven't already done so.
Leaning over the radiator is how I do it too. Ideally you need a 1 to 1.5 inch extension bar which is very hard to find, can be a wobbly bar too. Also a flexible ratchet helps too.
If I am really fed up, I will remove the whole bank of coil packs!
Leaning over the radiator is how I do it too. Ideally you need a 1 to 1.5 inch extension bar which is very hard to find, can be a wobbly bar too. Also a flexible ratchet helps too.
If I am really fed up, I will remove the whole bank of coil packs!
motomk said:
Remove the engine cover if you haven't already done so.
Leaning over the radiator is how I do it too. Ideally you need a 1 to 1.5 inch extension bar which is very hard to find, can be a wobbly bar too. Also a flexible ratchet helps too.
If I am really fed up, I will remove the whole bank of coil packs!
I'll ditto this. The wobble bar is a must! Makes it sooooo much easierLeaning over the radiator is how I do it too. Ideally you need a 1 to 1.5 inch extension bar which is very hard to find, can be a wobbly bar too. Also a flexible ratchet helps too.
If I am really fed up, I will remove the whole bank of coil packs!
I've got one of these
http://m.ebay.co.uk/itm/350934115204
Makes it easy enough as long as the engines not hot!! I believe 007 still has some skin off my hand on one of his headers
http://m.ebay.co.uk/itm/350934115204
Makes it easy enough as long as the engines not hot!! I believe 007 still has some skin off my hand on one of his headers

Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



