Multi fuel stove supplier in Falkirk area
Multi fuel stove supplier in Falkirk area
Author
Discussion

neil-c

Original Poster:

487 posts

209 months

Monday 13th January 2014
quotequote all
Considering installing a multi fuel stove into an existing chimney and would appreciate any recommendations for supplier/fitter in Falkirk area.

Any experiences/opinions of living with stoves welcomed too

MethylatedSpirit

2,077 posts

164 months

Monday 13th January 2014
quotequote all
I considered opening the chimney up and putting one in.

Went to someones house that had a wood burning stove, first thing that struck me was the smell. Everything smelled horrid, the whole house stank of it, you could even smell it off of the guys clothes. It made an awful mess and is pretty high maintenance. A good idea to have carbon monoxide detectors in the room too!!

It will also make other rooms of the house slightly colder since it draws in air to use for combustion. The air it uses must come from somewhere.

Then the cost, for what it is it's pretty expensive for something that you potentially won't use very much and is surplus to requirements.

That's just my opinion, went to see one and didn't like it. I suggest you do the same before committing to it.

Edited by MethylatedSpirit on Monday 13th January 16:51

MrADC

126 posts

217 months

Monday 13th January 2014
quotequote all
If you could smell it in the house it had been badly/incorrectly installed...

If you choose the right stove and install it correctly with a direct air feed it will only draw combustion air directly from the outside...

It will not make your other rooms colder - met no-one who regrets installing one - quite the opposite.

For very sound, straight and impartial advice (no connection I have just used them many times for installations and supply)

Eoin at StovesExperience in Shotts -http://stove-experience.co.uk

I'm off to chuck another (free) log on my well installed, efficient and homely stove!!

neil-c

Original Poster:

487 posts

209 months

Monday 13th January 2014
quotequote all
MrADC said:
If you choose the right stove and install it correctly with a direct air feed it will only draw combustion air directly from outside
Mmmm does that mean it must be on an outside wall then? House is a semi and wanted to use the existing chimney with a new liner.

MrADC

126 posts

217 months

Monday 13th January 2014
quotequote all
Not necessarily - every installation is different and stoves vary widely.

Get some expert advice specific to your installation (and what type of stove you want). I have a direct air feed through the floor void - but if you have a solid floor that will not be an option. But as the previous poster pointed out - a supply of combustion air is critical so an anti-draft combustion air vent through the wall may be necessary.

Always a good idea to look at the entire ventilation/insulation strategy for you house around the time you are installing a stove as the age, layout,construction and orientation of your house will have an effect on the stoves operation and efficiency. a well installed stove, correctly used with the right fuel will heat your home effectively and efficiently. Badly installed or badly used and they can be bit of an expensive disaster.


sherman

15,153 posts

243 months

Tuesday 14th January 2014
quotequote all
Not quite Falkirk area as they are based in Edinburgh but this company has the best name ever and is a wood burning stove specialist
http://www.bonkandco.co.uk/

m30dus

553 posts

213 months

Tuesday 14th January 2014
quotequote all
Recently used a chap to install two Morso stoves into my place - very pleased and the guy had OCD when it comes to doing the job right (and I'm a fussy so and so!!).

Sandy - 07899 875 572

He will know me as Duncan.

jcf

159 posts

258 months

Tuesday 14th January 2014
quotequote all
Speak to Jim Williamson the owner at:

http://www.stovedesign.co.uk

I am just up the road from you near Avonbridge they fitted a Stovax insert in my Fireplace last year. Very professional and a good guy to boot. Local support as well IF you have any warranty issues which i think could be very handy.

Cheers

John