Will these fit a Monaro?
Will these fit a Monaro?
Author
Discussion

VinceM

Original Poster:

1,906 posts

169 months

Monday 13th January 2014
quotequote all
If not which ones would I need? Cheers.

http://www.ebay.co.uk/itm/280951350039?ssPageName=...

maxmc2

2,063 posts

216 months

Monday 13th January 2014
quotequote all
I believe not they don't look right, could be wrong.

Behold81

2,931 posts

200 months

Monday 13th January 2014
quotequote all
I thought most of the washers for vx stuff is the same. Are monaros not the same as omegas, astras, vectras etc? If so then look online for people that upgrade their cars with newer jets.

Behold81

2,931 posts

200 months

Monday 13th January 2014
quotequote all
I thought most of the washers for vx stuff is the same. Are monaros not the same as omegas, astras, vectras etc? If so then look online for people that upgrade their cars with newer jets.

the_ferret82

25,627 posts

215 months

Monday 13th January 2014
quotequote all
Fit they might look right they won't.. apparently ones for a pug fit and look right...

Wyld Stallyn

2,056 posts

159 months

Monday 13th January 2014
quotequote all
the_ferret82 said:
Fit they might look right they won't.. apparently ones for a pug fit and look right...
IF this is the case - The Mist ones for a later Xsara Coupe (not picasso) have a better angle for the screen rake and are cheaper than the Pug part - Ones for 406 Coupe may be good too..? But only IF Ferrets Apparently is Right

They are quite big tho eek

gsd2000

11,515 posts

214 months

Tuesday 14th January 2014
quotequote all
I fitted some citreon jets a while ago. Looks fairly standard and work well

VinceM

Original Poster:

1,906 posts

169 months

Tuesday 14th January 2014
quotequote all
gsd2000 said:
I fitted some citreon jets a while ago. Looks fairly standard and work well
Which ones and how much were they. Mine have faded in the sun and are almost white, that's why I wanted some new ones.

Tattooboy

7,946 posts

209 months

Tuesday 14th January 2014
quotequote all
VinceM said:
gsd2000 said:
I fitted some citreon jets a while ago. Looks fairly standard and work well
Which ones and how much were they. Mine have faded in the sun and are almost white, that's why I wanted some new ones.
Why not take them off and spray them black again?

maxmc2

2,063 posts

216 months

Tuesday 14th January 2014
quotequote all
Tattooboy said:
Why not take them off and spray them black again?
thumbup

VinceM

Original Poster:

1,906 posts

169 months

Tuesday 14th January 2014
quotequote all
maxmc2 said:
Tattooboy said:
Why not take them off and spray them black again?
thumbup
My efforts with a rattle can be best described as awful and to buy the paint and primer would cost more than new jets I figured

gsd2000

11,515 posts

214 months

Tuesday 14th January 2014
quotequote all
http://item.mobileweb.ebay.co.uk/viewitem?sbk=1&am...

I needed to run a die on the bottom of the jet so that I could stick a nut and washer on but it works alot better than standard

VinceM

Original Poster:

1,906 posts

169 months

Tuesday 14th January 2014
quotequote all
Thanks thumbup

KMud

2,924 posts

187 months

Tuesday 14th January 2014
quotequote all
I've got the GM wiper-mount nozzles...still on my shelf. I am sick of spraying the whole car and it dripping in through the windows. If the sun comes out and I get a minute...