Steering wheel removal help.
Steering wheel removal help.
Author
Discussion

Dave3166

Original Poster:

1,858 posts

157 months

Saturday 25th January 2014
quotequote all
Hi Guy`s.

Can some one please give me an idiots guide on how to remove my VXR8 steering wheel, as want to send it away to be recovered in Leather and have new inserts put in while it`s there.smile

Cheers chap`s.thumbup

Regards

Dave S

mik_ok

1,580 posts

272 months

Saturday 25th January 2014
quotequote all
GaryH is your man.

Dave3166

Original Poster:

1,858 posts

157 months

Saturday 25th January 2014
quotequote all
mik_ok said:
GaryH is your man.
Thanks for that.

How do i contact the man.

Regards

Dave S

The Hofff

255 posts

202 months

Saturday 25th January 2014
quotequote all
Pull air bag fuse
Turn steering wheel 90 degrees to the left
Insert a short flat blade screwdriver in the square hole at back of the steering wheel cowling
Twist screwdriver and gently pull on one side of the air bag
Turn steering wheel to face 90 degrees to the right
Repeat with the screwdrvier
Disconnect air bag wiring
Disconnet steering wheel wiring
Remove large nut in the middle
Use a marker pen on the wheel and shaft to line up correctly later
Pull of steering wheel

Wyld Stallyn

2,056 posts

159 months

Saturday 25th January 2014
quotequote all
The Hofff said:
Pull air bag fuse
Turn steering wheel 90 degrees to the left
Insert a short flat blade screwdriver in the square hole at back of the steering wheel cowling
Twist screwdriver and gently pull on one side of the air bag
Turn steering wheel to face 90 degrees to the right
Repeat with the screwdrvier
Disconnect air bag wiring
Disconnet steering wheel wiring
Loosen large nut in the middle a few turns
Jiggle steering wheel till it moves on the shaft
Then Remove Nut
Use a marker pen on the wheel and shaft to line up correctly later
Pull of steering wheel
Edit adds the how not to knock yourself out when the steering wheel suddenly comes loose from the splines stages biggrin

preciousmetal

3,373 posts

207 months

Saturday 25th January 2014
quotequote all
Wyld Stallyn said:
The Hofff said:
Pull air bag fuse
Turn steering wheel 90 degrees to the left
Insert a short flat blade screwdriver in the square hole at back of the steering wheel cowling
Twist screwdriver and gently pull on one side of the air bag
Turn steering wheel to face 90 degrees to the right
Repeat with the screwdrvier
Disconnect air bag wiring
Disconnet steering wheel wiring
Loosen large nut in the middle a few turns
Jiggle steering wheel till it moves on the shaft
Then Remove Nut
Use a marker pen on the wheel and shaft to line up correctly later
Pull of steering wheel
Edit adds the how not to knock yourself out when the steering wheel suddenly comes loose from the splines stages biggrin
thumbup

yes I have seen a technician who has done that before and he was bruised for weeks eek

Dave3166

Original Poster:

1,858 posts

157 months

Saturday 25th January 2014
quotequote all
Thanks for replies guys.thumbup

Thats a great help, especially only loosen nut a bit until wheel is loose.rotate

Cheers guy`s.

Regards

Dave S

lee st

5,077 posts

196 months

Saturday 25th January 2014
quotequote all
As I just said in another thread, in the FAQ wiki you can use the carmodder page link to give you a guide. smile

Dave3166

Original Poster:

1,858 posts

157 months

Saturday 25th January 2014
quotequote all
lee st said:
As I just said in another thread, in the FAQ wiki you can use the carmodder page link to give you a guide. smile
Thanks, will check it out.

Behold81

2,931 posts

200 months

Saturday 25th January 2014
quotequote all
Few light shocks to the main shaft can help loosen the wheel if its not pulling off. Again leave the nut on. They do pop of fast!!!

motomk

2,189 posts

275 months

Sunday 26th January 2014
quotequote all
The steering wheel and the shaft you push it onto have a small flat section where their are no splines so you know they are lined up correctly. The controls are easy to remove once the steering wheel is off. It does involve undoing screws at the front then the back then the front again or the other way round. Can't remember and I only did it recently on my newer car. Think the plastic back cover just pushes off. It is clipped on, then you have access to the rest of the screws that hold the steering wheel radio controls and their surrounds.



Edited by motomk on Sunday 26th January 14:47

breizhpierrot

183 posts

169 months

Monday 27th January 2014
quotequote all
talking about steering wheel, I may be interested to change mine for a VXR model (OPC in france). Found some from an Insignia or another from an Astra.

fittable?



http://www.leboncoin.fr/equipement_auto/597351544....

http://www.leboncoin.fr/equipement_auto/607510294....

ARAF

20,759 posts

254 months

Monday 27th January 2014
quotequote all
breizhpierrot said:
talking about steering wheel, I may be interested to change mine for a VXR model (OPC in france). Found some from an Insignia or another from an Astra.

fittable?

Not sure. The Australian V8 models are closely related to GM in North America, but I'm not sure parts from the European models are interchangeable - though I believe the Insignia road wheels are now on the 5 x 120 pcd, so maybe there is hope for you.

breizhpierrot

183 posts

169 months

Thursday 30th January 2014
quotequote all
does anybody have some pics of disassembled R8 wheel?

ARAF

20,759 posts

254 months

Thursday 30th January 2014
quotequote all
breizhpierrot said:
does anybody have some pics of disassembled R8 wheel?
GaryH will have, but I don't think he's new a computer for a while now. I'll see what I can find on the HSV Facebook page, and link across. smile

neiljohnson

11,298 posts

238 months

Thursday 30th January 2014
quotequote all
ARAF said:
Not sure. The Australian V8 models are closely related to GM in North America, but I'm not sure parts from the European models are interchangeable - though I believe the Insignia road wheels are now on the 5 x 120 pcd, so maybe there is hope for you.
Insignia runs the same stud & nuts as well

ARAF

20,759 posts

254 months

Thursday 30th January 2014
quotequote all
Fek me, there's a lot of pictures on that site. cool

Anyway,


motomk

2,189 posts

275 months

Friday 31st January 2014
quotequote all
What car is it going on? The airbags might not match for an Astra or Insignia.
This is a 2010-2013 Commodore VEII SS V wheel which has piano black controls and silver spokes. This would fit any VE car ie VXR8, G8 etc.







breizhpierrot

183 posts

169 months

Friday 31st January 2014
quotequote all
thanks guys, I have to say i didn't use search function as far as i am browsing thru PH.

I had the feeling that the actual R8 steering wheel is too big, regarding actual standards. I tried a 2013 E-class merc, and the wheel is awesome.

not a sunday afternoon job, regarding hub installation, connections. Maybe adapting the ring of a smaller wheel on a modified R8 wheel hub could be another option.

Jader1973

5,245 posts

231 months

Monday 3rd February 2014
quotequote all
breizhpierrot said:
not a sunday afternoon job, regarding hub installation, connections. Maybe adapting the ring of a smaller wheel on a modified R8 wheel hub could be another option.
Wiring could be a problem e.g. Astra/Insignia wheels have cruise switches on them, but on the VE it is on the stalk.

VF uses the same wheel as Astra/Cruze/Insignia etc.