High volume mono office printer
Discussion
davepoth said:
HP Laserjet 4000 series, if you can find a good second hand one.

The design is now 20 years old but there has been one in every office (and pretty much every factory) I've ever worked in, still plodding along and only asking for toner in return.
Yep.. We have 4 still in use. They aint the fastest machines in the world but good and solid.. I had fun getting the A3 version to work with win7 but hp now do a universal print driver. 
The design is now 20 years old but there has been one in every office (and pretty much every factory) I've ever worked in, still plodding along and only asking for toner in return.
heres one with a 3 month warranty!
http://www.ebay.co.uk/itm/HP-LASERJET-LASER-PRINTE...
Just make sure they have the network card fitted.. If not the cards are cheap
Edited by 528Sport on Friday 31st January 12:39
We run the Kyocera FS9530 printers to destruction, most of ours make it to a couple of million pages only asking for toner and the odd maintenance kit.
Not the smallest printers, but anything built for real volume isn't.
Worked out the per pence cost a while back and it was far less than any contract on offer.
We've got a few of the bottom end models from the FS range too and even they take quite a bit of punishment.
Not the smallest printers, but anything built for real volume isn't.
Worked out the per pence cost a while back and it was far less than any contract on offer.
We've got a few of the bottom end models from the FS range too and even they take quite a bit of punishment.
I used to have a Tektronix Phaser 360, before Xerox took them over. That came with "free black ink for life", and although they started out reluctant ('you only get a free black if you buy a box of colour') the supplier soon started having the black-only kits in stock, and just wanted me to buy something else so they could cover delivery. Got to a point where they'd phone me up and say "we've just had 30 boxes of black ink, do you want them". The inks were solid block, looked like oversized wine gums.
It was a lovely printer, but that particular model wasn't high volume and wouldn't print on the back due to the melted-wax print process. I imagine they've tightened up on the Ts and Cs by now, if they even do the same offer on the new Phasers.
"Duty cycle" is the term you're looking for, but some manufacturers seem reluctant to provide that information, for reasons I can't fathom.
It was a lovely printer, but that particular model wasn't high volume and wouldn't print on the back due to the melted-wax print process. I imagine they've tightened up on the Ts and Cs by now, if they even do the same offer on the new Phasers.
"Duty cycle" is the term you're looking for, but some manufacturers seem reluctant to provide that information, for reasons I can't fathom.
Gassing Station | Business | Top of Page | What's New | My Stuff


