monaro misfire ? help
Discussion
Coming home tonight noticed a misfire at first under light load pop of unburnt fuel from exhaust then realized it had a slightly off idle and just noticeable under steady load. Tried a wot with tc off and I could tell it wasn't right.
Had my Bluetooth obd and torque app did a fault code scan twice no codes and check each cylinder misfire count was 0 with no history of misfire on any of them.
It was wet on way to work and rained all day while parked up, could it be condensation ? If so any ideas where I should start ?
Its on 40k and a 54 plate cv8 its still on OE plugs and leads. Is it a case of one lead at a time and try and eliminate cylinder or could it be something else apart from plugs/leads ? Its been faultless for so long.
Any ideas or tips ?
Had my Bluetooth obd and torque app did a fault code scan twice no codes and check each cylinder misfire count was 0 with no history of misfire on any of them.
It was wet on way to work and rained all day while parked up, could it be condensation ? If so any ideas where I should start ?
Its on 40k and a 54 plate cv8 its still on OE plugs and leads. Is it a case of one lead at a time and try and eliminate cylinder or could it be something else apart from plugs/leads ? Its been faultless for so long.
Any ideas or tips ?
I thought they maybe due a change, it says 50k service item for plugs its a std car but I guess 37k and 9 years takes its toll.
I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
MAF sensor still looked like it was giving a reading on the live data but I didn't pay any attention to it at the time.
I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
MAF sensor still looked like it was giving a reading on the live data but I didn't pay any attention to it at the time.
lastmin8264 said:
I thought they maybe due a change, it says 50k service item for plugs its a std car but I guess 37k and 9 years takes its toll.
I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
MF do a good set of upgraded leads for about £80, and plugs are cheap, i would just change them all @40K even if it does not fix your issue.I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
lastmin8264 said:
I thought they maybe due a change, it says 50k service item for plugs its a std car but I guess 37k and 9 years takes its toll.
I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
MAF sensor still looked like it was giving a reading on the live data but I didn't pay any attention to it at the time.
the problem with modern service schedules means people often leave items until they reach the miles but 10 years is way beyond the time these things should be changed.I'll try plugs first and then leads, the original ht leads look like decent bits of kit I heard unless I can trace the fault to one of them its best keeping them over aftermarket items but I'll check with MF. Mate lives in oz and offered to pick up and send me anything over.
MAF sensor still looked like it was giving a reading on the live data but I didn't pay any attention to it at the time.
Drop some copper plugs in, save money do the plugs yourself its an easy job as is changing leads and coil packs. No need to keep OE on the leads or plugs but as you say, best to do plugs first then leads then coilpack
Cheers gents, happy doing it myself.
Have fitted a new radiator and pas cooler this year so plugs and leads shouldn't be an issue. MF did my 30k service but I changed oil and clutch fluid last week so was going to get my 40k service done just before I goto le man classic. Looks like I'll need to do a few bits myself I'll take a look tomorrow and order some bits. Hopefully its not a coil mark like you had. Will take longer to find.
Have fitted a new radiator and pas cooler this year so plugs and leads shouldn't be an issue. MF did my 30k service but I changed oil and clutch fluid last week so was going to get my 40k service done just before I goto le man classic. Looks like I'll need to do a few bits myself I'll take a look tomorrow and order some bits. Hopefully its not a coil mark like you had. Will take longer to find.
Be aware the OE HT leads can be a bugger to remove without damaging them (I'm sure there's a knack...), so don't plan on getting them back on - do plugs and leads together IMO (warranted with your age/mileage). Spark plug #8 can bit a bit of a sod too, but maybe my spannering is weak 

KMud said:
Be aware the OE HT leads can be a bugger to remove without damaging them (I'm sure there's a knack...), so don't plan on getting them back on - do plugs and leads together IMO (warranted with your age/mileage). Spark plug #8 can bit a bit of a sod too, but maybe my spannering is weak 
Wobble bar will sort out #8. 
I don't get why people have an issue with removing Leads. I never broke one. Just twist the boot a fraction to free it up or it will not move.
Behold81 said:
Wobble bar will sort out #8.
I don't get why people have an issue with removing Leads. I never broke one. Just twist the boot a fraction to free it up or it will not move.
Wobble bar great if you've got it I don't get why people have an issue with removing Leads. I never broke one. Just twist the boot a fraction to free it up or it will not move.

Not sure if I broke my leads as I didn't put them back on, but definitely deformed the odd one of those metal sleeves :|
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff


