Any woodburner fitters / suppliers here
Any woodburner fitters / suppliers here
Author
Discussion

evo4a

Original Poster:

737 posts

212 months

Monday 3rd February 2014
quotequote all
Hi,
Looking to see if I can put a woodburner in my property in a certain place, any body in the business. Seems a good place to start.
I'm on the herts / essex border Bishops stortford.

nogginthenog

620 posts

232 months

Tuesday 4th February 2014
quotequote all
I looked-into this recently, and found that the cost of lining the chimney ( assuming you are installing the burner in a fireplace ) can be prohibitive. Apparently the liners have to be double-liners due to new regs. The liner isn't expensive, but they can be very reluctant to go round corners ( and most chimneys are not straight ) so necessitating removal of bricks, which in my case ( a terraced house ) would be very disruptive. This company :

http://www.castironfireplacecompany.com/

quoted over £1100 plus VAT as a starting point. I thought this was crazy, and my local builder would be a better bet, but he confirmed that it can be a nightmare, and declined to take the job on!

There is lots of useful info on that web-link though.

I visited a friend recently who had made and fitted his own woodburner. He says that if you do a DIY job, there is no need for a liner as long as you have tested the chimney for leaks, and it's in good condition. But if you ask a builder, they must follow the rules.

Hope that helps, and doesn't put you off the whole idea - like it did with me!

Tampon

4,637 posts

256 months

Tuesday 4th February 2014
quotequote all
Builder and installers don't have to fit liners either. They say and recommend it but it isn't in the regs that it has to be lined. Most stoves work better with them but they aren't needed unless you have a leaky chimney. FiL has a Hetas installed one without a liner as well.

I have a unlined Hetas installed woodburner that I sourced myself and got quotes based on labour only. Cam in at around £650 all in. Secondhand stovax stove for £150, £450 for widening the fireplace, lay hearth (left over garden stones) and installing the burner and £50 for a new collar and oak mantle.

Edited for a couple of pics
Before


After



Edited by Tampon on Tuesday 4th February 11:30

nogginthenog

620 posts

232 months

Tuesday 4th February 2014
quotequote all
Thanks for that info. In this case, mine would be cheap-as-chips to fit as the fireplace doesn't need widening.

Tampon

4,637 posts

256 months

Tuesday 4th February 2014
quotequote all
nogginthenog said:
Thanks for that info. In this case, mine would be cheap-as-chips to fit as the fireplace doesn't need widening.
No worries bud, it is getting people to quote once you tell them you just want installation and no liner. Some wont quote unless they can supply the burner and a liner without even testing the chimney.