Winter workshop jobs
Discussion
I've taken the Griffith off the road for a few months to catch up on some jobs; so it's in tip top condition for the TVR Tour of Spain we've booked up for.
So far I've
Taken of the shock absorbers and sent them off for a rebuild (rears were leaking)
Replaced the engine mounts
Run in a new, thicker starter motor cable
Replaced the 100A fuse
Replaced the valley gasket and seal
Replaced the rocker cover gaskets
Greased the prop shaft joints
Left to do
Refit the shocks when they are repaired
Get a new pair of rear tyres
Fit the carbo-disk light protectors I got for Christmas
Replace the oil pressure gauge sender
Fit a new splitter
Hopefully by then we'll have some drier weather and I can get some miles on it
So far I've
Taken of the shock absorbers and sent them off for a rebuild (rears were leaking)
Replaced the engine mounts
Run in a new, thicker starter motor cable
Replaced the 100A fuse
Replaced the valley gasket and seal
Replaced the rocker cover gaskets
Greased the prop shaft joints
Left to do
Refit the shocks when they are repaired
Get a new pair of rear tyres
Fit the carbo-disk light protectors I got for Christmas
Replace the oil pressure gauge sender
Fit a new splitter
Hopefully by then we'll have some drier weather and I can get some miles on it
Gassing Station | Griffith | Top of Page | What's New | My Stuff


