Disc skimming
Author
Discussion

DaciaBumdart

Original Poster:

22,454 posts

241 months

Wednesday 12th February 2014
quotequote all
Anyone had it done and what sort of price per front hub?

ARAF

20,759 posts

254 months

Wednesday 12th February 2014
quotequote all
DaciaBumdart said:
Anyone had it done and what sort of price per front hub?
Have a word with Monkfish. I'm sure they have a machine to spin the disc and skim it. smile

blue666uk

690 posts

155 months

Wednesday 12th February 2014
quotequote all
Had it done when I bought some VXR calipers/discs/pads for my CV8, they had obviously been stored outside or not in a dry place and where a bit pitted. My mechanic took them to a metal work shop next door to his garage who skimmed the discs, just took a tiny fraction of disc surface off to smooth them off, charged £10 per disc.

DaciaBumdart

Original Poster:

22,454 posts

241 months

Wednesday 12th February 2014
quotequote all
Cheers all

ARAF would do but there are a few places here that do hub based skimming so was just wondering price.

Blue, the 10 quid option sounds great but these need some hub skimming

neiljohnson

11,298 posts

238 months

Wednesday 12th February 2014
quotequote all
It works very well as long as the discs still have a good amount of life in them price is normally @ 40-50 a hub scc in St. Albans do it.

Trouble is the 5's front brake set up is st if the discs & pads are not genuine they will be even worse
The control arms can also cause vibration if the bushes are on there way out too

This is how I sorted the in laws once & for all cost 2k though yikes

Believe me when I say we tried every other option to sort it with no lasting results banghead

DaciaBumdart

Original Poster:

22,454 posts

241 months

Wednesday 12th February 2014
quotequote all
yeah a BBK is not on the cards the breaks aren't too bad its the control arm bushes that I believe start the rocky road.

Just replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be st on the pads but doubt it....

Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!

neiljohnson

11,298 posts

238 months

Thursday 13th February 2014
quotequote all
DaciaBumdart said:
yeah a BBK is not on the cards the breaks aren't too bad its the control arm bushes that I believe start the rocky road.

Just replaced the bushes with ploy's, much much better one of those subtle transformations that translates to something bigger. That got rid of the brake and shake, just a high speed judder. Parts should be original. it ws only serviced at BMW and was AUC supplied so figure give them a skim first its only a few quid. It could be st on the pads but doubt it....

Cheers Neil. I do hear what you are saying re breaks but 2k is off the cards until bonus time!
If they are genuine then you have 1/2 a chance make sure the calipers are clean & nice & smooth on the sliders
I fitted x5 bushes to the inlaws control arms & it did make a hell of a difference although the old ones were pretty fubar!
He spent a lot of money on the car last year on the ap's, miltek & superchip as well as maf's clutch & flywheel & lots of odds & sods but it was cheaper than buying a v10 & has made it a complete car.

lastmin8264

509 posts

181 months

Thursday 13th February 2014
quotequote all
Had my front ap brakes skimmed last week as developed a vibration when braking from motorway speeds between 50-35 mph local north west company did them on car for £30 a disc. Very pleased with result.

Monaro5.7

7,337 posts

210 months

Thursday 13th February 2014
quotequote all
Don't know if this help`s but I had to source a on car disc skimming tool for a new Mitsubishi dealer as they have to have this tool as part of the contract.

So might be worth contacting your local dealer as they do use it for retail work.

DaciaBumdart

Original Poster:

22,454 posts

241 months

Thursday 13th February 2014
quotequote all
Cheers all

going to try a garage tghats getting good press locally, 90 quid an axel so perhaps on the more expensive side but fitting in this afternoon so lets see....

EssexVXR8

1,790 posts

218 months

Thursday 13th February 2014
quotequote all
neiljohnson said:
It works very well as long as the discs still have a good amount of life in them price is normally @ 40-50 a hub scc in St. Albans do it.

Trouble is the 5's front brake set up is st if the discs & pads are not genuine they will be even worse
The control arms can also cause vibration if the bushes are on there way out too

This is how I sorted the in laws once & for all cost 2k though yikes

Believe me when I say we tried every other option to sort it with no lasting results banghead
Looks like you drove it into a kerb or large pothole lol

DaciaBumdart

Original Poster:

22,454 posts

241 months

Thursday 13th February 2014
quotequote all
he let the wife park it up

DaciaBumdart

Original Poster:

22,454 posts

241 months

Thursday 13th February 2014
quotequote all
Please take my money mr Garage. Top Lads don't want my money, checked the discs/pads for wear before doing the job.... Mr Burns, you've only got 10% wear (they were new when I bought it 16 months ago, I just drive smooth) and don't want to do the job.

Took time to explain the symptoms and they still are hesitant but agree to do it as its a step in the diagnosis. Its a slight break shim at 80-70 type breaking, well its worth a shot

neiljohnson

11,298 posts

238 months

Thursday 13th February 2014
quotequote all
DaciaBumdart said:
he let the wife park it up
This is correct laugh

extra330

177 posts

206 months

Thursday 13th February 2014
quotequote all
Had mine done for £30 off the car at local engineering company. ( Lancaster )
Just sat in the cupboard as i put new ones on a few months ago............. dont know whether to sell them on or keep for spares

DaciaBumdart

Original Poster:

22,454 posts

241 months

Thursday 13th February 2014
quotequote all
the benefit of on hub is they are true to hub rotation/tolerances. I took it for a drive tonight (to pick up a valentines day gift) and it needs doing, its got to be micro transfer I still don't buy into warping, not of the disc but possibly of the mounting

neiljohnson

11,298 posts

238 months

Friday 14th February 2014
quotequote all
DaciaBumdart said:
the benefit of on hub is they are true to hub rotation/tolerances. I took it for a drive tonight (to pick up a valentines day gift) and it needs doing, its got to be micro transfer I still don't buy into warping, not of the disc but possibly of the mounting
Pretty sure it was transfer that was causing Shaun's issues as if you hammered the brakes from 140-30 a few times the problem would reduce but then gradually come back, did try some uprated pads (performance friction i think) these were loads better but didn't stop it completely

altoplanohombre

254 posts

176 months

Friday 14th February 2014
quotequote all
AAS did mine - good job, price and cured the problem.wobble

DaciaBumdart

Original Poster:

22,454 posts

241 months

Friday 14th February 2014
quotequote all
neiljohnson said:
DaciaBumdart said:
the benefit of on hub is they are true to hub rotation/tolerances. I took it for a drive tonight (to pick up a valentines day gift) and it needs doing, its got to be micro transfer I still don't buy into warping, not of the disc but possibly of the mounting
Pretty sure it was transfer that was causing Shaun's issues as if you hammered the brakes from 140-30 a few times the problem would reduce but then gradually come back, did try some uprated pads (performance friction i think) these were loads better but didn't stop it completely
Thats my thoughts too. Its there, then its not then its back again. I'm taking it in now, will report back after and then monitor. I think though it is possible that the bushes are the triggering factor, as they wore/broke the problem started.

BTW when we took the bushes out, they looked like they were the originals with a date stamp of 00 :O

DaciaBumdart

Original Poster:

22,454 posts

241 months

Friday 14th February 2014
quotequote all
Job done, sorted the issue much improved.