Discussion
neiljohnson said:
Do you know what flow / psi you need?
From what i,ve read the standard pump will not keep up with the charger ,the car was mapped to what the pump could give ,but does it keep the pressure with out a drop when used for say thunder road or longer flat out runs ,not really looking for more power just being safe ,have done some searching but can,t fined much info ,what litres per hour is the standard pump ,any info would be good cheers rickneiljohnson said:
Do you know what flow / psi you need?
From what i,ve read the standard pump will not keep up with the charger ,the car was mapped to what the pump could give ,but does it keep the pressure with out a drop when used for say thunder road or longer flat out runs ,not really looking for more power just being safe ,have done some searching but can,t fined much info ,what litres per hour is the standard pump ,any info would be good cheers rickkaw said:
From what i,ve read the standard pump will not keep up with the charger ,the car was mapped to what the pump could give ,but does it keep the pressure with out a drop when used for say thunder road or longer flat out runs ,not really looking for more power just being safe ,have done some searching but can,t fined much info ,what litres per hour is the standard pump ,any info would be good cheers rick
What size injectors are you running?The dw65 deutchwerks pump will fit in most oe fuel senders & has been well tested on high boost applications holding good pressure at 30psi + boost so lots more than you would ever need
It's flow rated at 265lph & is cheap to buy.
One other thing to check is that the pump is getting good voltage it does not matter what pump you have if the wiring isn't up to much
It's flow rated at 265lph & is cheap to buy.
One other thing to check is that the pump is getting good voltage it does not matter what pump you have if the wiring isn't up to much
As fare as I know the pump on a r8 will surply 3 bar preasure but the ltrs an hour I don't know
I can't find the info I used but I remember that the fuel pump could run 60lb injectors at the recommended max off 80% duty cycle at 3 bar without trouble
But if the injectors are asked to run @ more the 80% duty cycle I couldn't say if the fuel pump could keep up sorry
I can't find the info I used but I remember that the fuel pump could run 60lb injectors at the recommended max off 80% duty cycle at 3 bar without trouble
But if the injectors are asked to run @ more the 80% duty cycle I couldn't say if the fuel pump could keep up sorry
I bought a Kenne Bell one. Didn't use it upon Rogers advise that it basically makes the standard pump run harder & with more voltage so can lead to premature failure. Yanks do like em tho & can't say I read any bad things about them, Oztrack recommended one as well, I went for a twin pump setup from Squash Performance in the end, needed a bit of extra plumbing to get it to fit nice, but does the job, the ZR1 is another option but it is a PWM controlled pump, so you really need a control module to run it, think Roger has developed a kit to do it tho
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff



