Discussion
I'll have a look and see if I can find it.
Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.
Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.
Edited by leigh1050 on Sunday 16th February 09:49
leigh1050 said:
I'll have a look and see if I can find it.
Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.
I've got one from pwp but it has 3 pins and I only have 2 wires Mick I've had a look and can just about see the alternator but no number.
Had a look on the web, Performance Parts have got them in stock in the U.K. at £249.99 with an old part no of 10327514 also had a look on an American site and they give the part no. for ls7 ls3's as 2588970 or 13501721.
Edited by leigh1050 on Sunday 16th February 09:49
So I was hopeing that I could cross ref the gm part number off the original oem one and buy one instead of rewireing my loom to suit the 3 pin one I've got
stevieturbo said:
Is the plug the same though ?
Early Camaro alternators had 4 pins, but only 1 wire was actually needed
Later units needed 2 wires, but still the same 4 pin plug.
The plug on the r8 is different I know what your saying and when I ordered the alternator I didn't think there'd be a problem Early Camaro alternators had 4 pins, but only 1 wire was actually needed
Later units needed 2 wires, but still the same 4 pin plug.
But I can't get the dam thing to charge and I can't find a wiring diagram for the 3 pin that I've got only the 4 pin
And the 2 wires I've got on the loom don't do what any of the diagrams say they should
stick100 said:
The plug on the r8 is different I know what your saying and when I ordered the alternator I didn't think there'd be a problem
But I can't get the dam thing to charge and I can't find a wiring diagram for the 3 pin that I've got only the 4 pin
And the 2 wires I've got on the loom don't do what any of the diagrams say they should
Take it to an alternator guy, or ask over on Tech.But I can't get the dam thing to charge and I can't find a wiring diagram for the 3 pin that I've got only the 4 pin
And the 2 wires I've got on the loom don't do what any of the diagrams say they should
A lot of modern alternators are ecu controlled, so that's maybe the bit you're missing. Or a local alternator repair place might be able to tell you what you need, or swap the regulator to something older and more primitive....ie one that works with one wire ! lol
After mine packed in last year and had problems with repair, I bought one of these higher output units.
Although it did require some adjusting of brackets to make it fit. Seemed decent enough value to me. I just went with the 170A version, simple 1 wire hookup as of alternators of days gone by.
ie main battery lead and 1 wire to light in dash.
http://alternatorparts.com/ad230-ad244-series-high...
Edited by stevieturbo on Monday 17th February 09:58
stevieturbo said:
Take it to an alternator guy, or ask over on Tech.
A lot of modern alternators are ecu controlled, so that's maybe the bit you're missing. Or a local alternator repair place might be able to tell you what you need, or swap the regulator to something older and more primitive....ie one that works with one wire ! lol
After mine packed in last year and had problems with repair, I bought one of these higher output units.
Although it did require some adjusting of brackets to make it fit. Seemed decent enough value to me. I just went with the 170A version, simple 1 wire hookup as of alternators of days gone by.
ie main battery lead and 1 wire to light in dash.
http://alternatorparts.com/ad230-ad244-series-high...
Nice bit of info StevieA lot of modern alternators are ecu controlled, so that's maybe the bit you're missing. Or a local alternator repair place might be able to tell you what you need, or swap the regulator to something older and more primitive....ie one that works with one wire ! lol
After mine packed in last year and had problems with repair, I bought one of these higher output units.
Although it did require some adjusting of brackets to make it fit. Seemed decent enough value to me. I just went with the 170A version, simple 1 wire hookup as of alternators of days gone by.
ie main battery lead and 1 wire to light in dash.
http://alternatorparts.com/ad230-ad244-series-high...
Edited by stevieturbo on Monday 17th February 09:58
I can find the Pontiac GXP number but that is for an Auto. Would that be on the same side for a LHD drive car???
It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?
It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?
motomk said:
I can find the Pontiac GXP number but that is for an Auto. Would that be on the same side for a LHD drive car???
It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?
Thanks mate it's a ls3 2008It looks like the 6 litre ones from the standard Holdens don't work with the LS3.
If I have time tomorrow I will try and ask a local Holden/HSV dealership.
VE manual LS3 2008-2009?
look at the link there is lots of part numbers there to work with.
http://www.woodauto.com/(F(VG60lIuYXy905y_i3B0ih6g...
Also found a part number from a company called WPS Part number 13969N
http://www.woodauto.com/(F(VG60lIuYXy905y_i3B0ih6g...
Also found a part number from a company called WPS Part number 13969N
Edited by Monaro5.7 on Wednesday 19th February 10:30
stick100 said:
Monaro5.7 said:
Any news 
Yep the one I've already got is the same as the one you got the part no for
So it means I've got a problem some where else
Ow the joys of it all
The link below is what looks like an alternative to what we have been looking at from Delco Remy
http://catalog.remyinc.com/Product/Details/12788?i...
Edited by Monaro5.7 on Thursday 20th February 15:47
Gassing Station | HSV & Monaro | Top of Page | What's New | My Stuff




