OZ Ultraleggera HLT

[V8KSN]

Morning all

Does anyone know if the OZ Ultraleggera HLT wheels in 18" will clear PCCB's?

Cheers

[mrdemon]

are the pccb 350mm like on my R or larger 380mm (its hard to keep tab on disk sizes for cars you don't own)

I have seen 18" OZ with 350mm PCCB and it's very close but fits ok.
I would say any thing bigger is risky on a 18" but it can be done it seems.


to quote a post off renlist but for the Alleggerita
"The 18" OZ Alleggerita do not clear PCCB.
I know this because I had a set of those wheels for my C2S. They would not fit my GT3.

I bought a set of 18" OZ Challenge wheels.
They clear the PCCBs. Barely. "

Edited by mrdemon on Tuesday 18th February 10:51

[V8KSN]

Excellent!

Cheers mrdemon

.......... maybe you are not that bad after all

[mrdemon]

I would look at tyre sizes 1st.

I stayed with 19" after wanting 18" for a track set because all the new track spec tyres are the right size for my car in 19"

19" give you room to play with

[DiscoColin]

18" on a 997... Is someone thinking about running slicks ?

[V8KSN]

DiscoColin said:

18" on a 997... Is someone thinking about running slicks ?

[nxi20]

I run OZ Alleggrita 18's on my 996 GT3 with 380mm rotors. We had to do a bit of fettling to the calliper to make it fit inside the wheel but you are only talking about a millimetre or two off the highest point. Prior to that it was running 350mm PF discs with no problems at all.