Big thanks Stick and Ringram
Big thanks Stick and Ringram
Author
Discussion

KMud

Original Poster:

2,924 posts

187 months

Tuesday 25th February 2014
quotequote all
Overdue thanks to Stick100 (Mike) and Ringram (Rich) for some engine work and a tune, was waiting for video capability. Short vid: https://www.youtube.com/watch?v=Dpuh3LcXFR4

The cam is an EPS 222/226, on went 243 heads (from Gurmeet), and other ancillaries. The video sounds a little droney, but that's just the exhaust over-powering the mic. The car is now a completely different animal, much more presence and grunt. You can hear on the video that I've got a dip in the idle speed to fix when coming off the throttle, but Rich's base tune was already most of the heavy lifting done, and I'm just slowly fiddling when I get a minute to myself (should mention Rich tuned with the MAF on but disabled, so I immediately upset his work by removing the MAF and enlarging the hole in the TB). The wideband serial cable was finally sorted today (null modem adapter arrived), so I can start logging properly now smile

e: I'm an idiot, the rev dip is probably because I fiddled with B4503 instead of B4504 laugh

Edited by KMud on Tuesday 25th February 19:35

gsd2000

11,515 posts

214 months

Tuesday 25th February 2014
quotequote all
Sounds great smile

stick100

7,017 posts

199 months

Tuesday 25th February 2014
quotequote all
thumbup no worrys mate I'm glad to help

SturdyHSV

10,443 posts

198 months

Tuesday 25th February 2014
quotequote all
Yay, more NA tuning smile Top work thumbup

jameshsv

5,844 posts

191 months

Tuesday 25th February 2014
quotequote all
COOL SOUND

ringram

14,702 posts

279 months

Tuesday 25th February 2014
quotequote all
Indeed NA = Good

Managed to hit AFR pretty much bang on too IIRC biggrin

MyM8V8

9,468 posts

226 months

Wednesday 26th February 2014
quotequote all
gsd2000 said:
Sounds great smile
+1

M11 MFP

688 posts

224 months

Wednesday 26th February 2014
quotequote all
Just about the perfect LS1 cam there.

115 LSA installed +3 with a little over .600 lift correct?

Is it from EPS themselves, or did you get it elsewhere?

A* sound.


KMud

Original Poster:

2,924 posts

187 months

Wednesday 26th February 2014
quotequote all
M11 MFP said:
Just about the perfect LS1 cam there.

115 LSA installed +3 with a little over .600 lift correct?

Is it from EPS themselves, or did you get it elsewhere?

A* sound.
yes 222/226 .604”/.604” 115 LSA +3

Pat G helped spec it, but it's not far off a stock EPS spec (usually 113 LSA).