Tamora geo .....

[Ant.]

Does anyone have the factory geo settings for the Tamora?

[Ant.]

Bump, Anyone??

[Sevenman]

Some info on my website, settings used by TrackVRoad (see link below). I also have a record of some settings used by Neil Garner on my car but haven't put those online yet.

http://gavinandnaomi.com/?page_id=418

[Ant.]

Sevenman said:

Some info on my website, settings used by TrackVRoad (see link below). I also have a record of some settings used by Neil Garner on my car but haven't put those online yet.

http://gavinandnaomi.com/?page_id=418

Thanks Seven

[Sevenman]

The Neil Garner info is:

Toe: -1 Front, -1.5 Rear

Camber: -0.75 Front, -1.1 Rear


I assume those are all in degrees, the sheet doesn't specify.

As an aside, the Gaz Gold Pros are set 11 from soft on the front and 8 from soft on the rear.
Springs are 400 lb/in front and 375 lb/in rear (I had the rears upped from the standard 325).

[Ant.]

Sevenman said:

The Neil Garner info is:

Toe: -1 Front, -1.5 Rear

Camber: -0.75 Front, -1.1 Rear


I assume those are all in degrees, the sheet doesn't specify.

As an aside, the Gaz Gold Pros are set 11 from soft on the front and 8 from soft on the rear.
Springs are 400 lb/in front and 375 lb/in rear (I had the rears upped from the standard 325).

Cambers will be degrees. Toe in will be mm, 1mm is about 10minutes